Q: Starting issue

Hello. From what you describe, it would appear that your transmission is beginning to slip (https://www.yourmechanic.com/services/gears-slipping-when-accelerating-inspection). This can be caused by many things. The first thing I would do is check the vehicle's transmission. Automatic transmission use fluid pressure to...

Hi there, thanks for writing in. The Toyota maintenance light (https://www.yourmechanic.com/article/understanding-toyota-service-indicator-lights-by-brent-minderler) is a reminder to get your oil changed. This light comes on periodically and needs to be reset with every oil change. As for the temperature gauge this is...

Hi and thanks for contacting Your Mechanic. The code P0016 (https://www.yourmechanic.com/article/p0016-obd-ii-trouble-code-camshaft-position-a-camshaft-position-correlation-bank-1-by-jay-safford) is for the crankshaft position sensor. Check the wiring harness to the sensor that is located on the bottom of the engine by the crankshaft pulley. Check for voltage...

The lack of acceleration or starting may be caused by many different things, but may be a sign of a failing throttle position sensor. The throttle position sensor (TPS) is a sensor used to monitor the throttle position of the...

This may be related to a faulty blower motor or blower motor relay. Occasionally, the blower motor itself will wear out or become faulty working intermittently as the brush contacts inside the motor wear out. The blower motor relay (https://www.yourmechanic.com/services/blower-motor-relay-replacement)...

Hi there. The fuel pump could be changed by using a special tool behind the seats in your vehicle. You will have to remove the carpet behind the rear seats and you will have access to the fuel pump. I...

The plug is designed to prevent tampering although you should examine the plug to be sure it is not also intended to prevent the mixture screw from moving once the adjustment is made. If the plug is only "concealing" the...

With the age of the vehicle, a worn / failed pinion seal is the most likely cause. Inspect the pumpkin and cover for any damage. If it is apparent that the pinion seal is leaking, make sure the pinion bearing...

Hello, thank you for writing in. The VSA (vehicle stability assist) light comes on steadily when there is a problem. If it blinks, it means the system is actively working to control the car and help it steer. If the...