Q: Q: Seat belt not working.

asked by on

The seat belt buckle does not latch.

More than likely the buckle needs to be replaced. It’s unsafe and illegal to drive without a seatbelt, so I suggest you get this fixed as soon as possible. Any qualified mechanical, like one from YourMechanic, can handle this task for you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Seat belt not working.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Brake Pad or Caliper Issue?

It is normal for the front brakes to last about 35k to 40k miles before needing to be replaced. When the brake pads were replaced it should of been noted if the right pads were worn down to 3mm and...

Q: Hearing a knocking/popping sound somewhere in the front of the car when driving.

There could be multiple issues causing the mystery sound you're hearing on your 2005 Mazda. My first inclination would be to check the steering stabilizer bar bushings, but if those were replaced, it could be an issue with your wheel...

Q: Transmission slips if I shut truck off and restart it will do fine for a few seconds then slip again

Hi there, thanks for writing in. The reason is starts slipping at 30 is this is where it needs to change to second gear or third gear. The problem is most likely the servo piston for the second gear engagement...

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...