Q: Rear shocks squeaking

asked by on

The rear shocks are making a loud squeaking noise.

It is a common problem with this car to have the key wear down and not trigger the tumblers in the key cylinder. The only fix would be to replace the key assembly and switch. I would suggest having a certified technician come out and see if he can get the key to turn because if he can you can just replace the key lock cylinder.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Rear shocks squeaking

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My brakes on my Jeep are squeaking after I replaced them?

Hello. This will occur if the brakes are not done correctly. When the brakes are done on this vehicle, the drums or rotors need to be machined or replaced. If they are not, then the pads will not break in...

Q: The ✔️engine light comes on after driving for about 2 minute and then goes out after you turn the car off then comes back

Hi There, If you have replaced the EGR Valve and it is still producing the same code, you may also have a faulty EGR vacuum modulator. The EGR valve allows the flow of exhaust gases into the intake manifold in...

Q: Ride height was raised when fitted with new wheels/tires

We do not normally deal much with aftermarket modifications here, nor do we endorse specific brand or manufacturers of components. I do have to say though, that you are going about this modification in a correct manner. You will want...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.