Q: Problem with fuel lines.

asked by on

I think the problem with my Accord are the fuel lines.

I would ask for help from one of the mechanics at YourMechanic. They can come to your location and check what the problem with your fuel lines is and recommend a solution for you.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Problem with fuel lines.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Heater making loud rumbling noise when on high 1996 Saturn SL2

Hi there - I believe the heater fan motor bearings are shot, and that's the noise you hear - increasing noise level as fan speed goes up. These bearings are generally not serviceable, and the fan motor should be replaced....

Q: Car starts and runs but dies after 4-10 minutes, will not restart...leave overnight, same all over again.

Your car uses the old Bosch KE injection system. It is a mechanical, electronic combination system that has the unique ability to run (though not very well) with the electronics not working at all, You might find that the section...

Q: 97 Honda Accord makes pulls while turning

First thing you want to do is jack the car up in the air, pull on the wheels and see if anything's worn out. A lot of times the tie rods are worn out and they wobble so change that....

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.