I need all four brake pads changed on my infiniti q50


I need all four brake pads changed on my infiniti q50 Mechanic's Assistant: How old are the rotors? How many miles are on the Infiniti? The rotors are good. Don't need those. The car has 87,000 miles Mechanic's Assist...

I need all four brake pads changed on my infiniti q50 Mechanic's Assistant: How old are the rotors? How many miles are on the Infiniti? The rotors are good. Don't need those. The car has 87,000 miles Mechanic's Assistant: What year is your Q50? My concern is the tech being able to reset the brake sensor. It's a 2016 Mechanic's Assistant: Are you fixing your Q50 yourself? What have you tried so far? No. I plan on using you guys

Automotive Expert
Hi! My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I **may** need to ask questions to find out basic information to help solve your specific problem. Sometimes I have to look up some information so it may take a moment to respond. I appreciate your patience. The system will give you an automated phone call offer to speak to one of us on the phone **. It is optional.** Some folks prefer to talk on the phone. If you don’t, please ignore it as I cannot control the offer from popping up. The technician should have the proper scan tool to reset any sensors or trouble codes. If they do not have the proper equipment then I would bring it to another repair facility. You can verify this by first calling them and asking them if they have the equipment required to reset the system.
Automotive Expert
I’m glad I was able to help :) My goal is to earn a 5 star rating experience. If you have any further questions about this concern, please feel free to reply back to me. If I’m not online at the time, I will respond ASAP when I get back. You’re awesome! Thank you for using JustAnswer!

What others are asking

Oil light staying on.
Hello and thanks for the question. Your oil light staying on even after the car has started is something that requires immediate attention. I would recommend having it checked asap. The good news here is that it doesn't always mean...
Water leaking from car
Hello. If you have a coolant leak from your car that you cannot easily see, then the system needs to be pressure tested. I would typically use a cooling system pressure tester to pressurize the system to see if the...
Is it safe to drive when the thermostat housing bolt is broken?
If it doesn't leak and you've got the other two bolts on tight then you should be okay. But here is what I would advise you to do: I would take it off again, take the two bolts off, and...
The RPM's on my car are increasing more quickly than I am accelerating
Hi there. If the O/D light was blinking, then that typically means that the computer is seeing a transmission problem. It can be as simple as a speed sensor or as complicated as a serious internal transmission failure. This can...
Engine misfiring on cylinders 2, 4, or 6
Hello. There is a possible recall (https://www.yourmechanic.com/article/what-to-do-if-your-car-is-recalled-by-jason-unrau) for the ignition control module on your vehicle. You will need to contact a GM dealer and see if your vehicle is on the recall list for the recall [03v231000](http://www-odi.nhtsa.dot.gov/owners/SearchResults?searchType=ID&targetCategory=R&searchCriteria.nhtsa_ids=03V231000) ignition control module...
Hazard lights wont turn off 2005 Toyota 4 runner
Hello. It sounds like the switch is bad for the hazards or more commonly it sounds like a relay failure. The circuit would need to be tested with a voltage meter to be able to tell for sure, but it...
Front end bearing or trans-axle noise. Hear a grinding noise noticeable above 15 mph. exists going straight, turning right/left.
Hello. To answer your question, the best way to remove the axles it by disconnecting the ball joints. The noise you are hearing can be coming from a bearing, an axle or from the transmission. I usually check the bearings...
Purge valve location
The vapor vent valve is located on air inlet tube between the throttle body and the mass air sensor. It is mounted on side of the air tube.
I have a 2014 genesis coupe 2.0t, in low rpms I have boost, when I step on it hard not boost, and it goes into a limp mode after
Depending on the cold air intake, you may be affecting the readings from the mass air flow sensor, which may be causing the motor to stumble when pushing for more boost as you describe. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement)...