Q: Need to locate body control module 1998 Chevy Blazer
Looking for the bcm, so I can replace it
My car has 200000 miles.
My car has an automatic transmission.
Hi - on your vehicle, the body control module is located up under the dash, to the left of the brake pedal. Unfortunately, this is not a service YourMechanic can offer at this time. Thanks for thinking of us!
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Left rear turn signal
Hello there, the turn signal bulb can fail to work for a variety of reasons. The most common issues would be the bulb (https://www.yourmechanic.com/services/turn-signal-bulb-replacement), turn signal stalk, bulb socket, or the turn signal assembly. A qualified Technician such as one...
Grinding noise from the front end
Hello. It is possible that the axles are making the grinding noise that you are hearing. The axles have ball joints in them. If the grease wears out and the ball bearings are not lubricated (https://www.yourmechanic.com/services/lubricate-steering-and-suspension) they will rub metal...
Uneven tread wear and vibrating
I believe you have some suspension problems. If you have worn balljoints, then you will have a problem with uneven wear and tear on your tires. Also, you could have a problem with your control arms. The front of your...
Exactly where is my thermostat located?
If you follow the lower radiator hose up toward the engine, that lower hose terminates at the thermostat housing. The housing itself is attached to the engine with three relatively small bolts. If you remove those three bolts and the...
Hyundai santa fe 2006 has trouble starting, rough idle and hesitation
A rough idle may be caused by many different things such as low fuel pressure, low voltage to the fuel injectors, dirty fuel injectors, a vacuum leak, a faulty Oxygen sensor or a dirty or failing idle air control valve....
This is for a bike, I believe it shouldn't be any different...
Hi Caleb. Unfortunately, we don't service motorcycles or provide technical assistance on motorcycles. YourMechanic is a mobile automotive service based around the maintenance and repair of mainly cars and trucks. You should contact a local motorcycle specialist for information on...
While sitting at stop light, with foot on brake, engine revs as if someone else has gas pedal to the floor....pull into driveway a
Hi There, This may be related to a faulty throttle position sensor or potentially a dirty or failing mass air flow sensor. The mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) monitors air intake as it is mixed with fuel prior to being...
When replacing rear brake pads on 2012 nissan rogue is it necessary to replace rotors at the same time?
Whenever brake pads are replaced the brake rotors must be resurfaced on a brake lathe or replaced outright. Putting new pads on a worn rotor is a guarantee that the new pads will wear irregularly, you will have vibration, and...
After new front bearings/hubs, Lexus still making noise and shaking
Hello, thank you for writing in. Feeling steering and suspension issues in the steering wheel is very common. While everything you have done is within reason, there are several components that need to be inspected or tested. You will want...
Related articles
2012 Subaru Outback vs. 2012 Chevrolet Impala: Which One Should I Buy?
When you compare a 4-door sedan versus a 4-door wagon, there are going to be some obvious differences. Even though the Outback looks car-like, the ride, the handling, and the mileage are going to make it more similar to an...
The Best Used Cars to Buy If You’re a Painter
If If you’re a painter, and you work for someone else, chances are you don’t care all that much about what you drive, as long as it gets you to and from work reliably. On the other hand, if you...
The Best Used Cars to Buy If You’re a Plumber
Plumbers Plumbers need to carry around all manner of tools and supplies. If you’re plumbing a large building, or even a decent sized home, you’re going to need a vehicle that has quite a bit of cargo capacity. A car...
Browse other content
Cities
Services