Q: Need help with block heater cord on my van

asked by on

Where can I run out the block heater cord on my van?

A: Hello. From the factory, the block heater c...

Hello. From the factory, the block heater comes out of the front of the vehicle. Depending on if you are using the factory system or if you are using an aftermarket unit you may need to mount it someplace else depending on where it attaches to the engine.

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Save up to 30%

Get a quote

What others are asking

Q: Heater only works at high speeds

If the blower fan is operational, then you might have a clogged cabin air filter. The filter is located behind the glovebox and should be changed periodically, to ensure proper HVAC operation and air volume. If the blower is not...

Q: Locked up

This is most likely a locked up caliper which can happen when the hydraulic brake pistons tend to drag a bit. When this happens, an intense heat is created resulting in the brake fluid reaching a boiling temperature. As this...

Q: The OEM tinted windows that came with my 2015 CR-V, is the tinting on the inside or the outside of the glass?

Factory tinting is on the inside of the glass. Generally, you shouldn't use any harsh chemicals on any glass or it may etch the glass and make it unclear or cloudy. If you choose to move forward with the remover,...

Related articles

How to Renew Your Car Registration in Oklahoma(DELETED)
Having your car registered with the Oklahoma Tax Commission is an important part of driving legally in this state. You will need to do this within 30 days of moving to Oklahoma...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.