Q: My car will go in every gear but drive

asked by on

My car will go in every gear but drive I got a tranny flush. Could it be the shifter cable
My car has an automatic transmission.

If you had a transmission flush and then the transmission lost forward gear then your forward clutch band is bad and lost first drive gear. You may want to double check the shift cable is selecting the correct drive gear. If cable is okay then you will need to have the transmission overhauled or replaced.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My car will go in every gear but drive

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Hello my car is losing acceleration. It still runs I have a 2014 Dodge Charger se 3.6. My bank 1 oxygen sensor engine light been o

Inasmuch as the check engine light is on, the first thing to do is resolve all the reported malfunctions. Once that is accomplished, the engine will be re-evaluated and any remaining issue, in your case hesitation or loss of power,...

Q: Cam sensor

The other camshaft sensor is under the air cleaner and near the fuel rail front of the engine, on the side of the head. You have to remove the air cleaner housing for access. If you're unable to find it...

Q: Q: Car will not start

If the vehicle is not restarting and there is no electrical power to the computer, then your automatic shutdown relay may be causing the problem. This relay is in the main engine relay box. If you are having a loss...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.