Q: My car is over heating and blowing cold air.

asked by on December 08, 2016

My car started over heating, i tried coolant and still over heats bad. Smokes like crazy. I dont wanna put money into my car unless i know what it is exactly .

My car has 153000 miles.
My car has an automatic transmission.

Heater is not working Inspection $94.99 - $114.99 Get a Quote
Thermostat Replacement $157.20 - $759.78 Get a Quote

The heater not working in some cases may be related to the overheating problem you are also having. This may be due to a faulty heater blower motor or potentially a bad heater core. As you may know, the heater core is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this warm coolant to heat the inside of the car with the help of the blower motor that blows the warm air through the vents inside the car. When the cooling system is not properly circulating coolant through the motor, this results in the warm coolant not being pumped through the heater core properly in order to warm the inside of the vehicle.

Engine overheating can be caused by a number of things such as low coolant levels, a faulty thermostat, or a failing coolant fan switch. As you may know the coolant fan switch helps to maintain the proper coolant temperature by turning on and off at specific temperature thresholds. When this switch is not working properly, this can cause the fans to come on intermittently, all the time or sometimes not at all. When this happens you will notice a temperature spike and drop occasionally as the fan comes on and off. When your thermostat is not working properly or is stuck closed, this will not allow the coolant to properly circulate through the engine, which may cause the engine temperature to fluctuate erratically or in some cases just remain hot. As mentioned above, this also restricts the warm coolant from flowing through the heater core which uses this to blow warm air into the cab of the vehicle. I would suggest having an expert from Your Mechanic come to your home to diagnose your cooling system.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What Dangers Are Caused by Hanging Things From the Rearview Mirror?
The first danger that should be considered is the fact that items on the rearview mirror (https://www.yourmechanic.com/article/is-it-dangerous-to-hang-something-from-the-rearview-mirror) are a distraction. Depending on the object they can partly obscure your view. Visibility is a main concern as well as depending on...
How do I use the auxiliary box?
While your car has a glove box that provides substantial storage for important paperwork, manuals and other items, it also includes an auxiliary box above the glove box. It’s smaller and provides more limited room, but still offers important storage...
What do I do if the moon roof won’t close properly?
There is a possibility that when you try to close your moon roof, it will close and then re-open slightly. If this happens, stop your vehicle, and perform the relearning process for the moon roof. Press and hold the CLOSE...
Oil leak behind oil filter
There should be an oil pressure sensor (https://www.yourmechanic.com/services/oil-pressure-sensor-replacement) located near the filter housing. Check to see if there is a leak at the sensor. At idle, there should be about 15PSI of pressure and about 50-60PSI at around 3,000 RPM's....
Steering tightens up when turning left while moving and there is a rubbing sound from driver's tire at 10-15 MPH.
The noise you mention seems more likely to be a wheel bearing (https://www.yourmechanic.com/services/wheel-bearings-replacement) failing - they get quite noisy with higher road speed, and get even noisier while turning (the outer wheel catches more load). It is possible the tire...
I am losing compreshion on all my cylinders 2005 Dodge RAM 1500
Hi there - you don't indicate your mileage, but low compression (https://www.yourmechanic.com/question/drop-in-engine-compression) may be a normal result of a high mileage engine, or a problem due to abnormal wear. Oil breakdown can cause excessive piston ring wear. Extremely lean mixtures...
the cars steering wheel is jerking to the left
Hello. Two things that could be causing your the issue on the Sorento are a twisted power steering hose or a faulty new component(power steering rack, PS pump). I suggest you check all power steering hoses to make sure they...
What should it cost to replace ac compressor, accumulator
It takes roughly 12 hours to replace the compressor and expansion valve. As you may know, the expansion valve is attached to the evaporator under the dash and thus is not readily accessible, hence the hours. If you input your...
Car still shaking after replaced coils and spark plugs codes cleared still showing misfire in coil 3
The code P0353 on this after you only had misfire codes and you changed the coil and plugs on cylinder number 3. You should disconnect cylinder coil and check connector and pins in coil are not damaged and if they...

Related articles

The Best Used Cars to Buy If You’re a Caterer
If If you are in the catering business, you need a reliable vehicle that will provide you with what you need to transport your food, linens, and other supplies. Generally speaking, you're better off buying gently used, because you will...
Symptoms of a Bad or Failing Heater Blower Motor Resistor
Common signs include the car's heater not working or getting stuck on a certain speed, or something getting jammed in the blower motor.
How Long Does a Connector Hose Heater Control Valve Last?
The The hose heater control valve opens and allows hot coolant from the engine to blow into the heater core. After the vehicle gets to the correct temperature, the thermostat is opened and allows coolant to circulate through the engine....