Q: my bmw 325i 2005 is shaking violently when into high speeds

Hi. The car's computer should be able to detect these shorts and should have a code stored in memory with some more information about what is going on. Typically, a ground connection somewhere has become loose or completely disconnected, reattaching...

No, this is not a normal condition. If the parking brake is out of adjustment or there is damaged parking brake hardware on one or both rear wheels, this type of noise can occur. If it is determined that the...

This may be a sign of low fuel pressure, a failing mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or potentially a clogged catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement). As you may already know, the catalytic converter converts toxic exhaust gases into less harmful pollutants that...

When a car has that many miles on it, it could be just about anything. The temptation is to go shooting in the dark and just start replacing parts until the car works again. That method can get very expensive,...

This may be potentially related to a failing alternator (https://www.yourmechanic.com/services/alternator-replacement) as these are known for making a whining sound when they are beginning to fail. When this happens, you may also notice your battery light (https://www.yourmechanic.com/services/battery-light-is-on-inspection) to come on or...

Hello there, many common faults will cause issues with the clutch on your 1998 Chevrolet S10. If the clutch line is continually disconnecting there are a few common faults. The most likely is a failing slave cylinder, air in the...

Hi there - since your radio is an RDS model, you will to have a GM service center unlock your RDS radio (https://www.yourmechanic.com/article/how-to-unlock-a-chevrolet-theftlock-radio-by-jason-unrau). RDS radio models cannot be unlocked with the procedure you mention.

Hello. Depending on what is wrong with the compressor will determine if it can be driven with it. If the compressor is simply not functioning and cooling the vehicle then you would be fine to drive it. If the pulley...

Your vehicle will not pass inspection with this light on. You may have a bad speed sensor at one of the wheels. Have the system scanned for stored codes so the system can be diagnosed.