Q: My 2009 Hyundai elantra horn keeps randomly honking. How do I disable it!!??

asked by on

The horn on my 2009 Hyundai Elantra keeps randomly going off. How do I disable it!!??

My car has 121000 miles.
My car has an automatic transmission.

Hi there. The horn is a safety device and as such, should not be disabled. If a problem exists, it’s best to resolve the problem first by having a professional mechanic diagnose and repair the electrical problem causing this issue.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. My 2009 Hyundai elantra horn keeps randomly honking. How do I disable it!!??

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My 2009 chevy impala LT D,3,2 gears my car won't go but goes in R and 1 what's wrong??

What you are describing could be caused by a broken forward apply band, a worn out inner surface of the input clutch piston or other comparable major failures. The fault can be diagnosed and if confirmed the transmission will likely...

Q: Why does my tensioner for my serpentine belt only move about 3" on my 2003 Santa Fe

The tensioner on your vehicle should move more than this. You need to start by checking the drive belt routing. If the belt is not routed right then it will appear that the tensioner is not moving enough. If the...

Q: I just bought a 2014 Hyundai elantra and the oil pressure light flickers on and off only sometimes .Its Like in a blink of an eye

Excepting an extremely low oil level, oil pressure is not a function of whether the oil level is high or low. If the light is coming on, engine oil pressure may simply be below the minimum pressure requirement at idle....

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.