Q: My 1989 Ford Mustang 5.0 is grinding after being started . I also have to mess with the key to get my radio & wiper blades to work
Car is grinding after being started & having to mess with key to get electronics to work like wiper blades & radio .
My car has 90000 miles.
My car has an automatic transmission.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Two codes coming up: P0449 & P0455
The most likely cause for these two codes is that the emissions control evaporative canister vent solenoid needs to be replaced. You may also want to check your gas cap to make sure it does not leak; it may be...
Door lock not working
If none of the locks work manually, you're using the wrong key, or somehow the key has been damaged. A key from one Honda vehicle will easily slip into the lock cylinder of another, but then won't unlock the door....
Rear Brake Imbalance
The brakes front and rear would need to be inspected for any excessive wear on the pads and rotors. The rear calipers may be sticking due to the caliper slides may make only one side of the rotor work. Have...
Heavy white smoke from exhaust(2001 Nissan Frontier supercharged)will not start after.
Hi there: Usually heavy white smoke is a sign of serious internal engine damage such as worn out piston rings or worn cylinder head valve guides. It could also be an oil control valve that is damaged. Regardless, the white...
My car is shaking when i stop. I was told i need new rotors. How much would that be including parts and labor
Not only would you need to replace the rotors but you would need to replace brake pads and rotors at the same time. (https://www.yourmechanic.com/services/brake-rotor-disc-replacement) The rotors are causing the car to shake when stopping. (https://www.yourmechanic.com/services/brake-pedal-vibrates-or-shakes-inspection) The brake pads will have...
Carbon buildup on the intake valves.
Sent to CS for billing question on how much it will cost to remove carbon buildup on the intake valves.
2006 Kia spectra stops shifting seemingly randomly.
Hi there. The transmission may have a failed harness or a failed computer (TCM). With having all of the shift solenoids and the torque converter clutch not functioning correctly, then there is a connection error. Remove the harness to the...
I want to couple two separate bike engine onto same shaft. Is that possible? If yes how ?
Hi there. To answer your question in the most simple terms, yes; it is possible to link multiple engines to a single drive shaft. However, this is something our mobile mechanics would not be the right source to ask how...
I have a 1995 chevy g30 6.5L diesel mini school bus. It wont shift into 2nd unless I floor it.
First check to see if an AAMCO warranty is in effect. Failure to shift could be caused by a faulty shift solenoid, other valve body defect, a defective clutch or clutch piston, internal hydraulic leaks and, as you know, external...
Related articles
What Causes a Car Door to Give You an Electric Shock After Driving?
Have Have you ever found driving to be positively shocking? For example, you have just driven a long distance on a cold, wintry day, in a car with leather-covered seats. Wearing a heavy woolen coat, you get out of your...
The Best Used Cars to Buy If You're an Uber or Lyft Driver
Are Are you thinking of becoming a driver for Uber or Lyft? That could be an exciting career change – you’ll get to meet a lot of interesting people, and if you love to drive, what better way to spend...
Symptoms of a Bad or Failing Distributor O Ring
If your car has a distributor, common signs the o-ring must be replaced include oil leaks and engine performance issues.
Browse other content
Maintenance
Cities
Estimates