I changed out my old headlights and taillights yesterday ...

I changed out my old headlights and taillights yesterday and now my right turn signal is blinking fast and I can't seem to find the issue Mechanic's Assistant: Have you checked the bulbs? Have you checked the connection? ...

I changed out my old headlights and taillights yesterday and now my right turn signal is blinking fast and I can't seem to find the issue Mechanic's Assistant: Have you checked the bulbs? Have you checked the connection? Yes,I checked and made sure they were all connected properly and it's still blinking fast Mechanic's Assistant: What is the make/model/year of your car? It's a 2001 jeep wrangler sport Mechanic's Assistant: Are you fixing your Wrangler yourself? What have you tried so far? Yes, I changed all the lights on the Jeep to after market lights and I'm wondering if the problem might be the battery because the battery in there now is old and the terminals have corrosion, could that be the issue? Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? I think that's it

Automotive Expert
Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP. Thank you for your reply and that information as this does help me better understand the situation. I’m sorry to hear you are having this problem. I know this can be frustrating. Please give me one moment to type out some info for you. I’ll be right back! A live optional phone call will be automatically offered by JustAnswer, you can accept or if you decide to decline we can continue with text until you feel the live call would be better suited to you. I will try to help you on this here it is possible that battery or corrosion on cables causing it , so make sure no loose grounds,but the Fast blinking means ussualy one or more turn signal bulb is burned out or not getting power , next ill be the flasher relay ,next will be the turn signal switch in steering column ? what is the mileage on it now ? are all the turn signals coming and blinking fasr or only one of them ,front or back ? **Please Let Me Know** **Thank You** **Chad Farhat** **ASE Certified Technician** king

It's only the turn signals on the right side it's both front and back and when I turn the signal off the right turn signal stays up on the dash even when the car is turned off, and the current mileage is 97,000Unfortunately I can't call because my phone doesn't have service
Automotive Expert
please ignore cal request not needed here,sorry website sending it not me prior to replacing the after market bulbs, you did not have that problem? did you try to go back to the original bulbs to see if the problem is solved doing that ,in case the bulbs are the issue

It's okay, thank youYeah, the blinkers worked good before changing them and I tried putting the old bulbs back in and it had the same reaction as the new ones
Automotive Expert
Please click on link to view the pdf file and turn signal wiring circuit I have highlighted it
Automotive Expert
and did you have an issue installing them? only turn signal bulbs you replaced? did you check the bulbs socket connector? , staying, this a short to voltage on the turn signal circuit

Okay, thank you for this information I'm going to check out the wiring later and see if that's the issue. Also I don't know if this is important but it was optional on the new headlights to rewire the turn signals to the headlights, do you think that would fix the issue, or maybe one of the wires isn't grounded correctly? All of the bulbs were replaced yesterday and the new lights were supposed to just be plug and play but I'll go through and make sure that all the wires are good.
Automotive Expert
To be honest, I will be guessing, I d rather you follow the wiring I can not tell without looking at the optional wire diagram where does it tie into ect If it was a plug and play and no wires were cut, then it has to be in the wiring or it is a coincidence where the turn signal switch failed and shorted out, if look at the turn signal wiring that is where they all tie in to and make sure you check the ground points ( G106, G107, G200) THE DIAGRAM SHOWS THE LOCATION IF YOU LOOK CLOSE LET ME KNOW Please Read Below How to Get Back in touch with Me You Can Always Come Back to this Conversation and Ask Me any Follow up Question you May have on this Issue (You can Copy this Link Page & Paste it in your Browser when Ready and it will Open up our Conversation Again) or there should be a Tab on your Screen to Add me As Your Favorite Expert I'm Online Daily from 7 Am Till Late Eastern Time Zone Thank You?Chad Farhat?ASE Certified Technician My goal is to earn a 5 star rating experience. If you have any further questions about this concern, please feel free to reply back to me. If I’m not online at the time, I will respond ASAP when I get back. Thank you for using JustAnswer! You are very Welcome If you need my assistance in the future, Start your Question with (FOR CHAD FARHAT ONLY) or Go to my profile page You can also add me as Favorite expert for any future questions [http://www.justanswer.com/car/expert-chadfarhat/?rpt=3800](//www.justanswer.com/car/expert-chadfarhat/?rpt=3800)

Thank you so much for your help, I really appreciate it
Automotive Expert
you are weclome

What others are asking

How do I use the Lock knobs to lock the doors?
Each door has an individual Lock knob directly above the door handle. Push this knob towards the front of the vehicle to lock that door, or push it towards the back of the vehicle to unlock that door.
What causes the fuel pump to keep burning out?
The first thing to come to mind is the quality (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-fuel-pump) of your replacement pumps. There are many manufacturers in the business of making inferior pumps and selling them for a tempting price. These are often what you get at...
Damaged ambient air temperature sensor
The short answer is yes, but only slightly. The ambient air temperature sensor provides information for the engine management system to make the correct fuel air mixture for the local temperature. If the sensor is damaged, it usually causes a...
Can i still drive if the electric power steering goes bad?
Hello, thank you for writing in. While it is technically possible to drive the car with a failing electric power steering system, it is not going to get any better. The vehicle will need to be serviced as soon as...
Fuel pump problems
Hello, thank you for writing in. The vehicle may be suffering from several issues simultaneously. The first thing to do is scan the vehicle for diagnostic codes to find out why the check engine light is coming on. This is...
Car won't accelerate & rattles
Hi There, What you are describing sounds like you may have a clogged catalytic converter. The catalytic converter converts toxic exhaust gases into less harmful pollutants that are suitable to be expelled into the atmosphere. When the catalytic converter is...
Check engine light on Had Variable valve timing solenoid replaced but the light came back in by the next day
You may have already fixed the problem but the computer has already stored the failure code and will need to have the computer memory cleared to turn off the light. Then drive it again to see if light returns. Please...
Front Ac unit stopped working but rear ac unit is making weird noises
You will need to have the control panel and electrical system tested to see if you have module or electrical issues. A mechanic like one from YourMechanic can diagnose this problem further to isolate the cause for the front unit...
My battery died and I can't get into my car with the keys or get into the hood.
You should have the ability to manually unlock the door with the key to get into the vehicle and pop the hood latch. If not, you may wish to schedule an appointment to have an expert from YourMechanic come to...