Q: How do I use the Lock knobs to lock the doors?

asked by on

How do I use the Lock knobs to lock the doors?

Each door has an individual Lock knob directly above the door handle. Push this knob towards the front of the vehicle to lock that door, or push it towards the back of the vehicle to unlock that door.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I use the Lock knobs to lock the doors?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Door handle broken

Hello. This is most likely a mechanical issue with one of the components of your door latch assembly. An inspection would need to be completed to determine why your door won't close all the way. I would suggest you have...

Q: What kind of engine oil should I use?

There are several different kinds of engine oil that you have to choose from for your vehicle, but there is only one recommended kind. It varies based on your vehicle model. To choose the appropriate engine oil. If you...

Q: Slow crank, eventually turns on. Sometimes takes 10 mins to build the crank up

Hi there, thanks for writing in. I'd be happy to provide some insight. If the engine is cranking very slow, then it may not start well. You should have a starter voltage drop test in order to isolate if the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.