Q: I have a 2003 ford explore I replaced water pump & thermostat but my car still over heats with Ac on

This concern may have illuminated the Check Engine Light as well. When fault or warning lights do illuminate, there is generally some stored fault code to go along with it. Have an experienced technician, such as one from YourMechanic, inspect...

Hello. I will be happy to assist you. I believe the problem you are having could be a result from a faulty mass air flow sensor (https://www.yourmechanic.com/services/mass-airflow-sensor-replacement) or a throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement). Each component heavily inputs on the air fuel ratio of...

Hey there. As you alluded, this is a sign of a bad cooling fan relay switch (https://www.yourmechanic.com/services/cooling-fan-relay-replacement). The cooling fan relay switch comes on when the temperature reaches a certain level to help cool down the radiator. When this is...

The issue you are having is likely a faulty brake light switch. The fact the bulbs will light proves they are in good condition. The switch in located next to your brake pedal. When the brake pedal reach a certain...

You may have a cam or crank sensor problem or an electrical issue. You will need to see if the engine has no fuel pressure or spark and test computer to see if there is codes stored to diagnose the...

Hello, thank you for writing in. If you have only water in the radiator, and no antifreeze then more than just overheating (https://www.yourmechanic.com/services/brakes-steering-and-suspension-inspection) can happen Often the freeze plugs in the engine will pop out causing issues, the engine block...

Hi There, Shaking or vibrating may be caused by many different things such as faulty spark plugs, poor fuel pressure or misfires. Other things such as a faulty idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) may cause the engine idle to drop...

The noise is probably brake or wheel bearing related. If brake related, it might be due to the brake pad wear indicator contacting the rotors. If you desire that this problem be diagnosed by a certified Mechanic, dispatched by YourMechanic...

Hi There, Unfortunately, this will only be a temporary fix. The fumes from the fuel will quickly reduce the tapes ability to properly seal the hole. I would recommend replacing the evap line. As you know, a leak in the...