Q: How do I use the driver power window controls?

asked by on January 15, 2016

How do I use the driver power window controls?

The driver’s door has switches to control all four of the windows. These switches are set up to correspond with the windows they control (for example, the front left switch controls the driver’s window, while the back right switch controls the rear passenger side window). Press and hold any of these switches down to roll down the corresponding window, or pull and hold any of these windows up to roll up the corresponding window. Release the switch at any point to stop the progress of the window.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Car jerks and no acceleration. Slow pick up

Hey there. This may be related to a dirty or failing mass air flow sensor. The mass air flow sensor monitors air intake as it is mixed with fuel prior to being injected into the motor. When this fails, this...

What does the ABS light on the dash mean?

The anti-lock brake (ABS) indicator light on your dash should come on during the system’s self-check when you start the engine, but should go out shortly afterward. If the light comes on again later or stays on, it’s a sign...

How do I use the ParkView rear back up camera?

The ParkView rear back up camera gives you extra vision when backing up. The camera is located on the rear of the vehicle, to the left of the trailer hitch. When you put your car in REVERSE, the ParkView system...

When turned to the "On" position, there is a clicking noise as if there's a dead battery.

Hello and thank you for contacting YourMechanic. Check the connections from the ignition switch to the starter. It seems to me like there is a short within the ignition switch making the starter engage when the ignition switch is selected...

What type of gas should I use in a 2012 Ford Fusion?

Like most other cars on the market, yours is designed to use unleaded gasoline. However, not all types of gas are the same. Ford recommends that you use nothing lower than 87 octane gasoline. If your car is rated as...

How does the Nissan Vehicle Immobilizer system work?

If your Altima is equipped with the Nissan Vehicle Immobilizer system rather than the vehicle security system, you have significantly more protection from theft. The system works to prevent someone from stealing the car (although it will not prevent people...

How do you open the trunk with the remote?

You can open the trunk easily just be getting close if you have the Intelligent Key in your pocket, but you can also use the remote to open the trunk lid from a distance if you want. Here’s what you...

How do you delete a phonebook from the HandsFreeLink?

Adding a phonebook from your cell phone to the HandsFreeLink® (HFL) system is pretty easy, and deleting a phonebook is even easier. To delete an entire phonebook, just: Choose “delete imported phonebook” from the menu on your navigation system’s...

2012 honda civic rear taillights not working brake lights working

Hello, thank you for writing in. The most common cause of your symptoms is the fuse blowing. If the fuse is good, the next place you want to look is to the switch. The headlight switch may be shorting out...

Related articles

Symptoms of a Bad or Failing Ignition Switch
If your car cannot start, starts but quickly dies, or has electrical components that stopped working, you may have to replace the ignition switch.
A Buyer’s Guide to the 2012 Volvo S80
The The S80 doesn’t just bring subtle elegance and luxury features to the table, it also brings the long-renowned quality and safety ratings of its Swedish maker. While the brand may not rival the names of BMW and Audi, the...
What Are Rocker Switches and How Are They Used in Cars?
Every Every function inside your vehicle is controlled by a switch in some way. Some switches require a high current capacity, while others are low voltage. Low voltage switches usually control the electrical position of a relay, which directs a...