Q: How do I put my truck in gear?

asked by on

How do I put my truck in gear?

There are many gears that your truck can be shifted into. These gears tell the car whether to drive, stay still, or move. To put your vehicle into gear.

  1. Hold down the brake pedal.

  2. Start the vehicle.

  3. Move the gearshift lever to the Park, Reverse, or Drive.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I put my truck in gear?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Bad VCT solenoids

If you believe that your VCT solenoids or cam phasers are inoperative, I would recommend having them tested and replaced as necessary by a qualified professional in order to resolve this issue. If these parts have truely failed, it is...

Q: My car's shifter is stuck in park.

Hi there. The shifter gets the power from the brake light switch as for a safety switch. In order to change gears, the brakes must be applied. Check the power into the brake light switch and the power out of...

Q: How do you check the condition of the wiper blades?

Your wiper blades might not seem like the most critical component of your car, but there’s no doubt they’re vital when it starts raining. Checking their condition is very important. Here’s how to do it: Spray the windshield with...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...