Q: How do I lock the power windows?

asked by on January 11, 2016

How do I lock the power windows?

The power windows can be locked so that children are unable to operate them. To lock the power windows, press the power window lock switch, which is located in front of the driver’s power window switches. Press this button a second time to unlock the switches.

Tip

When the power windows are locked, the driver’s window will still function normally. The driver will also have control of the windows from the driver position with the windows locked.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

Like rumble noise on pulley system side
I would recommend checking all of the idler pulleys to be sure the bearings are freely spinning on them as these can sometimes wear badly when they are subjected to dirt and debris or severe weather conditions.
Automatic Trunk open/close feature not working but button lights up. I soldiered broken wires back together - reset?
Hello, thanks for writing in. Most of the time this is caused by a programming issue with the control module. It usually occurs if the module fails or if there is a loss of power. It can also occur if...
Is it possible to repair deployed airbags?
Hello there. Airbag deployment is a serious repair with your 2016 Ford Fiesta. Airbags cannot be repaired and must be replaced, as any repairs would make the vehicle unsafe. To give an accurate estimate, it is important to know which...
Got new water pump less than 9 months ago. Now boiling sound and overheating smell. Temp says its good
Hello. The overheating issue your vehicle is having is likely not caused by the water pump once again. Though an inspection of your water pump performance should be checked when trying to diagnose this issue. The temperature gauge not going...
Car vibration
Your car has some of the most sophisticated Motor Mounts in the business. It may even have a variable motor mount that has a vacuum line going to it. When the car is idling, the engine vacuum opens a valve...
05 XL-7 CAN FRONT CRANK SEAL BE REPLACED WITHOUT REMOVING TIMING COVER?
The seal has to be accessible (that is visible and there is enough room to pry it out) on removal and, as well, there has to be enough space to press it back in using an appropriate seal installation tool....
Smoke from engine cooling fan
It's not unusual for a fan to fail, and you can probably get away with replacing just that. But since the fan seized, there may be a blown fuse or fusible link back in the system that will also have...
car shakes when i start it in the morning, check engine light blinks then stays on
If you have the engine computer scanned you most likely have a misfire code to one or more cylinders. You may have a bad plug wire or coil or spark plug. If you have not got a tune up then...
Best suv v6 for towing a two horse trailer
Your bet bet would be to first get the maximum trailer weight and tongue weight and then check the major SUV brands to see if they will exceed the trailer weight tow capacity. You can then narrow down the vehicles...

Related articles

A Buyer’s Guide to the 2012 Chevrolet Malibu
While While many people thought that Toyota and Honda had taken over the mid-size family sedan market with models like the Camry and the Accord, Chevrolet surprised the whole market with the Malibu. Available with either a four- our six-cylinder...
A Buyer’s Guide to the 2012 Mercedes-Benz M-Class
The The 2012 Mercedes-Benz M-Class is a mid-size luxury SUV that combines utility and comfort to make the perfect every day vehicle. It can handle almost any terrain with its all-wheel drive model. Drivers and passengers will experience a quiet...
How to Replace a Backup Light Switch
The backup light switch connects to your transmission and turns on when you shift into reverse. This switch lets drivers know that you are backing up.