Q: Q: How do I insert a CD?

asked by on

How do I insert a CD?

Inserting a CD to play is very easy. Simply insert the CD, label-side up, into the CD slot. After the CD is partially inserted, the CD player will automatically insert it fully.

Tip

If the CD is not automatically inserting, do not try to force the CD. Instead, pull out the CD, make sure that there isn’t a CD already in the slot, and try again.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I insert a CD?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I adjust the sound system clock?

It only takes a few steps to adjust the clock in your vehicle’s sound system: 1. Press and hold the Clock button until the clock flashes. 2. Use the Seek/Track buttons to adjust the hour. 3. Use the Tune/Fast Forward-Rewind...

Q: Q: When turning on navigation system, radio comes on too

This is a problem inside the nav/radio unit. The system will have to be tested and serviced by a dealer certified repair facility. You may have to have it removed and sent out for repair or replacement.

Q: How to remove inner tie rod ends can't seem to find hex engraving 4 spanner or socket set to twist Off inner tie rod off steering

You are correct, there is no hex pattern machined into the component. There is a special tool that can be used to remove the inner tie rods. Sometimes you can get a large wrench to work. There are only two...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.