Q: How do I disable the Courtesy Wipe feature?

asked by on

How do I disable the Courtesy Wipe feature?

There is a feature that includes an extra wipe of the windshield wipers after every wash. This feature is called the Courtesy Wipe. To disable the Courtesy Wipe.

  1. Press the Setup button until you see the Courtesy Wipe feature.

  2. Press the Reset button to turn it off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I disable the Courtesy Wipe feature?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the Pass Temp feature?

The Pass Temp feature allows you to change the temperature between the driver and passenger side. This makes them the ride more enjoyable for both the driver and passenger. To use the Pass Temp feature: Press the Pass Temp...

Q: How do I use the windshield wiper de-icer?

If your car is equipped with a windshield wiper de-icer (optional equipment), you have the means of removing ice accumulation and snow from your wiper blades. This is more than a mere convenience – it can greatly enhance safety by...

Q: My engine has a rough idle. It spits, sputters, and stalls out. Could it be a bad injector?

Hi and thanks for contacting Your Mechanic. Yes an injector could cause an engine to spit and sputter or even stall out. Injectors over time can become dirty from the contaminate in the fuel tank that when passed the fuel...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...