Q: How do I disable the autolock and autounlock features?

asked by on

How do I disable the autolock and autounlock features?

Autolock and Autounlock are two features that control when the doors to lock and unlock. Autolock automatically locks the doors when the vehicle is put into motion. Auto Unlock automatically unlocks the doors after the vehicle has been turned off for ten minutes.To disable either one of these features.

  1. Press the Setup button until Autolock or Autounlock appears.

  2. Press the Reset button to switch the selected feature off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I disable the autolock and autounlock features?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2008 Ford F-150 no reverse

You may have broke the reverse band inside the transmission and would require the transmission to be taken apart to replace the broke part.

Q: How do I use grade assist?

The grade assist feature helps control your engine and transmission when driving on a steep grade, so that you don’t put too much stress on the transmission or the brakes. To turn on the grade assist, press the Grade Assist...

Q: My 2016 Ford focus SE keeps dying at stop lights. It'll sputter a little bit and cutoff and the battery light comes on. It'll star

It seems awfully new to be needing a battery. I certainly wouldn't recommend replacing it without having it tested. I would start by focusing on the stalling. Your car is very new to have any kind of mechanical failure. It...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.