Q: Q: How do I delete or edit the contacts in the Uconnect phonebook?

asked by on

How do I delete or edit the contacts in the Uconnect phonebook?

    1. If you are editing a contact, press the Uconnect phone button, which is a telephone symbol on either the center console or the steering wheel. The system will say “Ready” and beep, at which point you should say “Phonebook edit entry.” You will then be prompted to name the entry and the designation (home, work, mobile, or other), and then you can edit the information.
    1. If you are deleting a contact, press the Uconnect phone button, and when prompted, say “Phonebook delete”. After the prompt, list the contact you wish to delete, or say “List names” to hear your contact list and choose a contact to delete. If you choose to hear the list of names, then press the Uconnect voice command button when you hear the name you wish to delete, and say “Delete”.
    1. If you wish to delete all of the contacts in your Uconnect phonebook, press the Uconnect phone button, and when prompted, say “Phonebook erase all.” Then follow the prompts to confirm this action.

Tip:

You can only edit or delete contacts that have been manually entered into your Uconnect phonebook. Contacts that have been automatically downloaded cannot be edited or deleted through the Uconnect system.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I delete or edit the contacts in the Uconnect phonebook?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I use the rear seat warmers?

The rear seat warmers are controlled by the Rear Seat warmer switches, which are on the inside of both rear doors. To use a rear seat warmer, press the corresponding switch. Press the switch again to turn off the warmers....

Q: Clunking sound after replaced ball joints

There may be a recall pertaining to the tack bar welds breaking on this vehicle. Call your local Ram dealership and see if your vehicle is affected by recall 15V541000. If you have play up and down but not side...

Q: Vehicle shifting by itself

Hello. If your truck is shifting on its own, that is a serious issue that needs immediate attention. There can be several causes for this including bad transmission fluid or loose shifter linkages. A certified technician, like one from YourMechanic,...

Related articles

How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.