Q: What does the Cruise Set to XXX message mean?

asked by on

What does the Cruise Set to XXX message mean?

The Cruise Set to XXX message can appear on your driver information center (DIC) when you are trying to use the cruise control system. The DIC displays this message to let you know what speed the cruise control is set to.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. What does the Cruise Set to XXX message mean?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: Traction Control System

The stabilitrack system is your car's traction control system. Depending on the conditions in which you were driving (i.e. snow or slippery conditions, etc), this may have caused this to engage. It may also be possible that this was engaged...

Q: Having intermittent problems with cruise control on my car

Hello. This can be caused by a number of different issues. Most of the time this is caused by a bad brake switch. If the switch is shorting out, then it will cause the computer to think that the brakes...

Q: Trans shifts when cold gets stuck in 2nd when temp hits about 210

Hello. A transmission that gets stuck in 2nd gear can be caused by a few things. A few possible causes are, as you suspected, a faulty speed sensor, a faulty shift solenoid, or even a mechanical issue. The speed sensors,...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.