Q: How do I adjust the speed control?

asked by on

How do I adjust the speed control?

When the speed control is active, but you are no longer driving at the desired speed, then you can adjust the system easily. There are three ways to adjust the speed control: 1. Quickly press and release the Set + button to increase the speed by 1 MPH, or the Set – button to decrease the speed by 1 MPH. 2. Press and hold the Set + button to increase the speed; release the button when the desired speed has been set. Or, press and hold the Set – button to decrease the speed; release the button when the desired speed has been set. 3. Use the gas or brake pedal to achieve the desired speed, then press the Set button.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. How do I adjust the speed control?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I select a gap distance?

If you are using the adaptive cruise control, then you can select how far you would like your cruise control to keep you from the vehicle in front of you. To adjust this setting, simply press the Gap button on...

Q: How do I turn autolock on or off?

The autolock feature automatically locks your doors when your vehicle begins moving. This feature can be turned on or turned off by following these steps: 1. Press the Up/Down buttons on the steering wheel until Settings is displayed on the...

Q: The traction light is on but the button on the console says it's off. Is it safe to drive the car?

Your car should be safe to drive, however this suggests that you may have a traction control system problem. Your car is equipped with wheel speed sensors at each of the four wheels which monitor wheel speed while relaying this...

Related articles

Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.