Q: How do I adjust the rear view mirror?
How do I adjust the rear view mirror?
The rear view mirror is an essential safety feature that provides you with visibility through your rear window. Before driving, you should always adjust your mirror so that you have maximum visibility. The mirror can be adjusted manually by grabbing it and moving it to the desired location.
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Why Do Hoses Collapse?
Hoses undergo a variety of system changes during normal engine operation. When the engine is completely warmed up, pressure inside the cooling increases to around 18 - 20 psi. This causes the hoses to expand. One hose in particular has...
Steering wheel locking up.
The theft system on your car can have an intermittent problem of being disabled because of having other keys or metal items on your key ring. These items may be interfering with the code key to disable the system for...
Cylinder 6 misfiring
Since you have already replaced the plugs and wires, that narrows down what the problem could be. The most likely culprits of your issue are a faulty fuel injector or ignition coil. However, there is a slight chance that there...
Engine noise at idling, Check Engine Light on
Hello. It is common for these cars to have problems with the camshaft gears making noise and causing the Engine Light to come on (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). If the problem persists, then damage to the motor is possible. It would be a...
What can cause engine not to crank
Hi, thanks for writing in. This can happen for many reasons such as over torquing the plugs when tightening them, or previously stripped threads in the cylinder. In either case, the result is the plug will result in being blown...
When coming to a stop i get a jerk on the drivers side.
If the jerking reaction is something related to pressing the brake pedal, this may suggest a faulty brake caliper. If your vehicle pulls to one side when you apply the brakes it typically means that you have a braking imbalance...
Abs module is no good. I have another one from junk yard with the same year and FWD and engine. Will it work?
Hi there. As long as the ABS module is the same design and has the same ports on it then it will work just fine on your vehicle. Be sure to bleed all of the brake lines after replacing the...
2010 Ford F150 I keep getting a code for oxygen sensor about once every 10 days. Does that mean it is on the verge of going bad?
A code to one of the 4 O2 sensors does not always mean the sensor is bad or going bad. It could be another problem with the fuel system or intake system causing the code. You did not give us...
Related articles
A Buyer's Guide to the 2012 Mazda 2
For For those of you who really just want a car for the sake of transportation—and not towing or for a job where you need to transport tools—you might want to consider the 2012 Mazda 2. This car may not...
How to Buy Good Quality Work Gloves
Work Work gloves protect your fingers, palms and the backs of your hands when you’re working on your car. However, they’re not all created equal. You’ll need to make sure that you’ve selected the right work gloves for the task....
How to Buy and Install a Booster Seat
Booster seats are important safety features for young children. When a child has outgrown their child restraint system, but is not yet big enough to safely fit the adult-sized lap and shoulder belts, it is time for them to use...
Browse other content
Cities
Services