Skip the auto shop - Our mechanics make house calls

Q: How do I adjust the power liftgate?

asked by on

How do I adjust the power liftgate?

A: The power liftgate has three modes: 1. OFF....

The power liftgate has three modes: 1. OFF. In this mode, the power liftgate is deactivated, and the trunk can only be opened manually. 2. MAX. In this mode, the power liftgate is activated, and the trunk will open to its full height. 3. ¾. In this mode, the power liftgate is activated, and the trunk will open most of the way, but not to its full height. This feature is very helpful when in a garage or other enclosed area with a low roof. To choose between these three model, rotate the power liftgate knob, which is on the overhead console. The vehicle must be in P (Park) to adjust the power liftgate.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I clean the rearview mirror?

The rearview mirror can be easily damaged. Never use glass cleaner on the mirror, and do not spray a cleaning solution directly on the mirror. Instead, dampen a very soft towel with water, and lightly clean the mirror with that....

Q: Power seat not moving forwards or backwards

Hi. The power seat has different motors that control the seat's movement. One moves the seat forward and back, another up and down, and another for tilting. All the motors work separately but connect to the same switch. The switch...

Q: Car accelerates then slows down before changing into proper gear when moving from a stopped position

The problem is addressed in technical bulletin 06-07-30-023E. The problem is a slipping second clutch inside the transmission and requires the clutch and steel clutch plates and seals to be replaced. This requires the transmission to be removed and disassembled....

Related articles

P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.