Q: Have replacement hood supports but don't know where they are placed , original ones are missing

asked by on March 21, 2018

I don't know where the good supports are placed, the original one (s) are not on the car. A picture would be helpful

My car has 114000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing


Experienced Mechanic?

Earn up to $70/hr

What others are asking

What does the fuel gauge show?
The fuel gauge is located on the instrument panel, and tells you how full your fuel tank is. The gauge has an F (Full) on one end, and an E (Empty) on the other. Where the hand points to lets...
problem starting engine
Hello there, thank you for asking about your 2011 BMW X5. This may be a variety of potential issues but most likely related to a fuel delivery problem. Try checking idle air control module which regulates the air flow intake...
AIR CONDITIONER IS BLOWING HOT AIR. Does this mean its the compressor necessarily?
Hello. I will be glad to help you with your Murano. A common cause of a "no cooling" condition is the system is low on refrigerant, however, inasmuch as your car is only 6 years old, if the refrigerant level...
Leak caused by corrosion on throttle body terminal
Hello. There are some fairly sensitive electronics inside the throttle position sensor (TPS) housing. They are also not engineered to be easily disassembled for repair either. Unless you are quite experienced at unsoldering and soldering printed circuit board connections, I...
Speedometer is registering half speed
Hi there. Most of the time this is caused by a bad vehicle speed sensor (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement). This is a common failure on this vehicle. When the sensor fails it either stops reading or it reads improperly. It can also be...
Car turns over but when in gear won't move 2009 Buick Enclave
Hello - check fluid level in the transmission, and for problem code, whether the Check Engine light is one or not. I suspect it will be. This sounds like a failure internal to the transmission, clutches (https://www.yourmechanic.com/article/does-an-automatic-transmission-have-a-clutch), valve body or...
Replaced pcm in a 2011 grand caravan why won't it turn over
You will need to have the computer reprogrammed at a dealer to work on your car. The PCM is designed to only give three starts then lock you out unless reprogrammed.
Shaking at high and low speeds.
Hi Javier. Thanks for contacting us tonight. What you're describing seems to indicate an issue with your wheel bearings. Typically if you hear a grinding or high pitched squealing noise when you turn to one side and at high and...
2007 Dodge Caliber jerking motion while driving new crank and cam shaft as well as tune up and oil change what could be the proble
It is possible that an issue such as this would be associated with a check engine light. I would recommend having any trouble codes that are stored in your system read by a qualified professional to determine the exact cause...

Related articles

2012 Chevrolet Malibu vs. 2012 Ford Fusion: Which One Should I Buy?
When you want a midsize sedan, you’re looking for something that will offer you the best fuel economy for the size as well as additional safety features that will keep your family safe while you’re driving across town or around...
The Best Used Cars to Buy If You're a Dog Trainer
If If you are a dog trainer, you expect a lot from your vehicle. You want a ride that is safe, roomy, and of course, dog friendly, since your training operation will often mean that you need to transport the...
Understanding Chevrolet Oil-Life Monitor (OLM) System and Lights
Car symbols, or dashboard lights, are a car service reminder. The Chevrolet Oil Light Monitor system indicates when and what service your car needs.