Q: Replaced pcm in a 2011 grand caravan why won't it turn over

asked by on

Pcm isn't working. Replaced with used Started 3 times. Now won't start.

My car has 150000 miles.
My car has an automatic transmission.

You will need to have the computer reprogrammed at a dealer to work on your car. The PCM is designed to only give three starts then lock you out unless reprogrammed.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Replaced pcm in a 2011 grand caravan why won't it turn over

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: My car has a problem with wheel vibration (while braking)

It does sound like your rotors are warped. The rotors would have to be measured to determine if they can be resurfaced, or if the rotors need to be replaced. You don't need to upgrade to aftermarket slotted and...

Q: Keep burning out ac clutches

The clutch is burning up due to slip of the clutch overheating the clutch and melting the rubber. The reason it is slipping is the compressor locking up at the higher RPMs. You will need to reclaim the A/C refrigerant...

Q: Multiple leaking parts

CV axles leak from the a dust boot. Inside the dust boot is a special high temperature grease that provides lubrication to the joint. If the grease leaks, the joint will be damaged from the lack of lubrication and extreme...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.