Q: Q: Gas line leaking

asked by on

The gas line is leaking by the engine.

Fuel lines by the engine on GM cars are usually plastic and use quick connects. The fuel rail that houses the injectors is steel. The leak could be a failed O-ring or a cracked line. Do not delay this repair for obvious reasons. I would have this gas leak inspected and repaired as soon as possible to get you safely back on the road.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: Gas line leaking

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Fluid leak between engine and transmission possible slave cylinder

First check the fluid level in the clutch master cylinder to see if it is getting low. If it is low on fluid then you have a slave cylinder leaking. If the fluid does not go low then you do...

Q: Labor cost to replace rear blower motor 2002 Chevy Suburban 5.3 L engine

Hi Derek. Depending on the vehicle, a blower motor replacement for the heating and AC system can range from $150 to $400 in most cases - for labor. If you'd like to get an estimate to have this service completed...

Q: On the highway it increases acceleration.

It sounds like your engine's idle speed is way too high. It is possible that your throttle cable may have gotten stuck on something that is causing it to pull the throttle slightly at all times. It is also possible...

Related articles

How Do Power Car Windows Increase Passenger Safety?
Power windows are responsible for approximately 2,000 emergency room visits every year. When a power window closes, it exerts enough force to bruise or break bones, crush fingers, or restrict an airway. Though...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...