Q: Frozen ac pump

asked by on

Troubleshoot loud noise

My car has 1290832 miles.
My car has an automatic transmission.Changed water pump now its the ac pulley seems frozen and not turning

If the a/c compressor pulley does not turn and is seized you will need to see if the inside compressor clutch shaft is seized or the compressor pulley bearing is seized. Sometimes the pulley bearing seizes and ruins the front of the compressor. Depending if the compressor or pulley bearing is seized you will need to replace the compressor.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Frozen ac pump

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: I just bought a new battery, but periodically, my car would not start, this was in late winter.

You may be right about some kind of drain, or it could be that the alternator is functioning, but is weak. Either way a charging system test should reveal the problem. A technician can hook an ammeter up to the...

Q: Gas filler neck rejects fuel immediately.

Your fuel neck has a restriction in the hose. The filler neck has a big hose on the out side and a smaller hose on the inside. If someone tried to siphon gas from your truck they may have knocked...

Q: How do I turn on the heated front seats?

The heated front seats are controlled by the climate control system. There are two heated seat buttons on the climate controls: one for the driver seat, and one for the passenger seat. To turn on the heated seats, press the...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.