My [headlights](/topics-headlight-ford/) have quit workin...


My [headlights](/topics-headlight-ford/) have quit working, first driver side low beam then passenger low beam then drivers high beam, guessing passenger high beam is next? Mechanic's Assistant: Have you checked the fuses?...

My [headlights](/topics-headlight-ford/) have quit working, first driver side low beam then passenger low beam then drivers high beam, guessing passenger high beam is next? Mechanic's Assistant: Have you checked the fuses? Have you checked the bulbs? I checked the 10 amp fuses, they are good, i replaced the bulbs when the first one went out and it continued . Mechanic's Assistant: What is the make/model/year of your car? 2006 ford focus zx3 Mechanic's Assistant: Are you fixing your Focus yourself? What have you tried so far? Just changed the bulbs and checked the fuses, my neighbor said it could be a relay but i dont know how to see if that is bad. i will be fixing it my self if possible Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Thats all i know right now

Automotive Expert
Howdy from Tennessee, I'm Chris aka Moose. Who am I helping today? I'm glad you've come here to get help. I will do my best to get the answer you are looking for. I help many customers, so sometimes my replies are delayed, I will respond once available. I try to be online at 1-5 pm and 10 pm-5 am every day. - We need to perform some wire testing using a voltmeter or test light and a wiring diagram. - Will you be comfortable with that?

i dont have those tools, i would need to get them
Automotive Expert
I understand. A cheap voltmeter is only about $30. I can go ahead and provide the diagrams and tests for you to have and do once you get the tool. Give me a moment.

thanks, \*\*\*\*\* \*\*\*\*\*
Automotive Expert
Joshua, here is the wiring diagram [https://www.dropbox.com/s/s5wy2byrrsrsjou/06focuszxhead.pdf?dl=0](https://www.dropbox.com/s/s5wy2byrrsrsjou/06focuszxhead.pdf?dl=0) Here is the diagram again with the tests drawn on the diagram [https://www.dropbox.com/s/qbprono1onzboc3/2021-02-02\_135026.png?dl=0](https://www.dropbox.com/s/qbprono1onzboc3/2021-02-02_135026.png?dl=0) Thank you for seeking us for help, I hope I provided what was needed. Press reply if you need to follow up. If you liked my answer please let me know so I can mark your question complete. Moose

thanks, \*\*\*\*\* \*\*\*\*\* get the tools needed . thanks again. have a good day
Automotive Expert
Glad to help.

What others are asking

Why is my transmission overheating?
This answer has to be short and to the point. Your vehicle should be covered by your standard 3yrs/36,000 mile warranty. Before doing anything else you need to take it to your dealer and have them address the issue. This...
Difficulty accelerating, loud fan noise
Hi there. If no body work was done and it was just paint work then it may be an electrical issue. It sounds like the fan is staying applied, which will cause this noise and cause the vehicle to act...
Car won't pass smog due to computer code P0420 - 2006 Volkswagen Rabbit
This code is related to the catalytic converter (https://www.yourmechanic.com/services/catalytic-converter-replacement). As you may know, the catalytic converter is a section of your exhaust system that helps to complete the combustion process when excess unburnt fuel gases pass through the exhaust. Due...
My passenger headlight keeps going out, then tap it and comes back on?
Hello. This sounds like the bulb filament in the glass is intermittently loose or the plug connection to the back of the bulb is loose, corroded, broken, or intermittent. If the bulbs are many years old, they have probably lost...
Brake calipers needing replacement after brake pads and rotors were replaced?
I think you have it backwards. The pads and rotors do not cause bad calipers, but a sticking or binding caliper (https://www.yourmechanic.com/services/brake-caliper-replacement) can cause the pads to wear excessively and cause the pads to dig into the rotors. The calipers...
Car overheated then died now won't start
Hi There, Depending on how long the engine overheated (https://www.yourmechanic.com/services/car-is-overheating-inspection) for, this may suggest you have a blown head gasket. A blown head gasket may cause a number of different symptoms. Coolant in the engine oil, an engine misfire or...
Broke fuse socket while replacing fuse
That's not an unusual thing to have happen, but it often means that the circuit in question has been overloaded for a while and the resulting heat has damaged the plastic that holds the little electrical contacts in place. somebody...