Been driving my truck all around and it still won't cycle


Been driving my truck all around and it still won't cycle Mechanic's Assistant: What is the make/model/year of your car? Ford f150 5.4 L 4×4 ,2010 Mechanic's Assistant: Are you fixing your F150 yourself? What have...

Been driving my truck all around and it still won't cycle Mechanic's Assistant: What is the make/model/year of your car? Ford f150 5.4 L 4×4 ,2010 Mechanic's Assistant: Are you fixing your F150 yourself? What have you tried so far? I fixed the codes that went off then resetted it Mechanic's Assistant: Have you seen this code before? Have you tried a hard reset? I did a hard reset driven almost 300 miles still says 2 or more emission modules haven't cycled stil Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? Thats it

Automotive Expert
Welcome to Just Answer I'm Chris aka Moose, I'm sorry you are having problems with your F150. I will do my best to help you get this resolved. If I happen to be helping another or step away during our communication, please know I will follow up as soon as I am back available/online. I try to be online for about 10+ hours a day, midday and late-night shift. - Do you know what monitors will not complete?
Automotive Expert
Since you were not able to reply to the info request I sent. I cannot be as accurate and thorough as I would like. I hope what I can provide does help. If you have already done the drive cycle for each monitor and they still will not complete and there are no codes stored. Then the concern will be the PCM computer software is faulty. Thank you for visiting Just Answer, I hope I was able to answer your question. If you need to follow up on this concern please use the reply button. If you like my answer please reply so I can mark your question complete. Moose

What others are asking

Bad battery.
As batteries get older they start to lose their ability to maintain a full charge, this is known as a sulfated battery, it will need replacement (https://www.yourmechanic.com/services/battery-replacement).
Brake lines leaking.
Brake lines are known for rusting out and leaking. I would recommend a technician from YourMechanic come out and replace it as needed. (https://www.yourmechanic.com/services/brake-hose-replacement)
Car makes scraping sound and rattles
Replacing the transmission fluid (https://www.yourmechanic.com/article/how-to-replace-transmission-fluid-by-robert-tomashek) and filter (https://www.yourmechanic.com/article/how-long-does-a-transmission-filter-last) is part of the manufacturer's recommended service that should be done at intervals for regular maintenance. The transmission can have issues such as this when it is failing, low fluid level, torque...
I want to know if it's ok to drive to Canada from Massachusetts with bad converter
If you have a lack of power, it is not a good idea to put highway mileage (high RPMs) on your vehicle. It can clog your fuel injectors and damage your engine. There are two types of catalytic converter damage....
Car vibrating when its 40 miles and check engine light is on
The only real solution is to have diagnostics run to find out why the Check Engine Light is on. There are dozens of sensors between the engine, transmission, traction and anti-lock system that could be causing the poor performance (https://www.yourmechanic.com/services/loss-of-power-inspection)....
Truck stalls when stopping ocassionally. 2001 Mazda B4000
Hello. There could be a problem with the throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) or the idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement). Both of these sensors help control proper air-fuel mixture and engine idle. Sometimes carbon builds up and clogs the idle air...
Heater and oil light issues.
Hello. From what you describe it would appear that your vehicle is experiencing two separate issues. Problems with the heater can be caused by a few different things. The first thing I would check is to make sure that the...
Got a problem with the tail lights on 99 Lincoln town car
It sounds like you may have one of the filaments burnt in the brake light bulb (https://www.yourmechanic.com/services/brake-light-bulb-replacement). The brake light bulb has two separate filaments that receive power separately depending on the function. One is for the brake lights when...
Does the Chrysler 4.0 V6 have a timing belt that must be changed?
Hi Stephen. Thanks for contacting us tonight. The 4.0-liter V6 engine has a timing belt that needs to be changed every 100,000 miles.