Q: Brake lines leaking.

asked by on

I have a likely leak in the brake lines. The brake fluid reservoir will not stay filled and a puddle forms beneath the car after filling up the reservoir.

Brake lines are known for rusting out and leaking. I would recommend a technician from YourMechanic come out and replace it as needed.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Brake lines leaking.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: 2002 Pontiac grand am running hot quick and heater not working

Lack of heat can be a consequence of overheating as the coolant boils and creates pockets of trapped air that impede flow to the heater core. Also, if the coolant level is low, it may not circulate to the heater...

Q: Hi Jason. I just had my ac condenser and compressor replaced 2 weeks ago. My ac went out again and I am now being told it is the m

The manifold line is not normally replaced when compressor or the condenser is replaced unless a problem is noted. In order to replace it now you will need to get a quote from customer service to get estimate for the...

Q: How do I check the brake fluid level?

The brake fluid level can be easily checked. Simply open the hood, and locate the brake fluid tank. The tank has a MIN line and a MAX line, and you should be able to see where the fluid rests between...

Related articles

P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...