I cut the hazard light wires on my 2014 ford fusion and t...

Hello there and thank you for contacting JustAnswer, Sorry to hear about your fusion, to understand better you cut the wires for your hazards and now they won’t stop?

Customer attachment 1/20/2021 2:07:09 AM

What happens if you connect the wires back together?

Customer attachment 1/20/2021 2:07:52 AM

Ok do they turn off when you turn off the car?

No they stay on 24/7I twisted them together

What happened?

They are still flashing

Something is triggering it to go.

Can I not connect the hot wire to another one and ground it

Is the button pushed down?

Whats if i got a switch at at autozone. There is no button

Which switch

The button is off

Customer attachment 1/20/2021 2:12:14 AM

The hazard light switch

I would try that first

Whats that just a new switch

Connecting wires might just cause you more problems.the switch

Customer attachment 1/20/2021 2:17:10 AM

What about this one

Same amps and voltage

I have no clue

You can always return it.

Ok

Let me know if it works for you

I will

Great

The switch didn't work

Sorry about that.

What do I need to do now

Did you try another switch?

No they are still flashing i can't go anywhere wo pulled over

Are you driving the car?

Ppl are starting to think I'm crazy bc they stay on all the time. They say you know you left your flashers onI need to go on like 3 hour trip but flashers are on

Sorry about that. I don’t what else to think of. I will opt out and let another technician help you.

You need to repair the wiring and reinstall the switch. If you are not able to do this then you'll have to get a repair shop to do it.

I've reinstalled a new switch for Ford fusion. The light is laminated but the flashers are still on

Did you repair the wiring properly?

Yeah it was 3 wires matched the colors

Ok I'll have to get a wiring diagram tomorrow and we can do some testing. Do you have a voltmeter to do some testing?

I've identified the hot and ground and the neutral like I said its lights working

Customer attachment 1/21/2021 3:19:42 AM

Ok good. I'll get the wiring diagrams tomorrow and give you some tests to do. What [engine](/topics-engine-ford/) does it have and does it have daytime running lights?

4 cylinder and yes daylight running lights

Which 4 cylinder? There's 4 options. Is it all wheel drive?There's 3 turbo engines. 1.5, 1.6, and 2.0. There’s also a non turbo 2.5.

No turboSe

Ok thanks. I'll follow up tomorrow.

There's a violet/black wire and a violet wire on that connector. Are you sure you don't have those wires crossed? The black/violet wire should be a ground signal. The brown/yellow wire should get a ground when you press the switch. It sends the ground to the BCM when you press the switch so the BCM can turn on the flashers. The violet wire is the backlighting voltage for the switch. The BCM (body control module) sends a voltage signal to the hazard flasher lamp switch to monitor for a hazard lamp function request. When the hazard flasher lamp switch is pressed, the voltage signal is routed to ground, indicating a request to activate or deactivate the hazard lamp function. When the BCM (body control module) receives a request for the hazard lamps, the BCM (body control module) supplies on/off voltage to all the turn lamps. The timed on/off cycle for the hazard lamps is approximately 70 times per minute, regardless of bulb outage.

I fixed it

Awesome!