My car doesn't shift to drive mode only Return
Responses
AhmedT111
241 days ago
Hello there and thank you for contacting JustAnswer, sorry to hear about your trucks transmission, I’ll do my best to help you solve this issue, did you try lower gear and S mode?
Customer
241 days ago
not yet how this can be done?
AhmedT111
241 days ago
Is the shifter stuck?
AhmedT111
241 days ago
Is it stuck in park?Have you tried this?
If you cannot move the gearshift lever out of P (Park) with the ignition in the ON position and the [brake](/topics-brake-ford/) pedal depressed: 1) Apply the parking brake, turn the ignition key to LOCK, then remove the key. 2) Insert the key and turn it to OFF. Apply the brake pedal and shift to neutral
Customer
241 days ago
The Gear shifts well in drive mode the car doesn't move only moves on return
AhmedT111
241 days ago
Ok let me see what I can find.
AhmedT111
241 days ago
sorry had to step away from my computer.
AhmedT111
241 days ago
What do you mean drive mode?
AhmedT111
241 days ago
If it does Not engage in Drive a ine pressure test should be Performed with live data or a hand held gauge.. If forward and reverse is lost its usually a pump or torq converter failure
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Lights melted the headlights
Hello! Thank you for writing in about this problem. This issue is common in 2005-2011 Tacoma models. Toyota recently released Technical Service Bulletin (TSB) TC-14-025 that specifically covers this problem. An extended warranty has been placed on the headlamp assemblies...
Car making loud clicking noise.
Hello. The 2.4 liter engine in your car does have a few common issues. It is most commonly caused be a timing chain problem. When the timing chain stretches or if a tensioner fails you will get this noise and...
Knocking sound and steering column vibration - 2005 GMC Sierra 2500
Without hearing or experiencing the noise myself, it is hard to make an accurately diagnose this but GM has a TSB (technical service bulletin) (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-tsb-to-diagnose-and-repair-a-car-by-valerie-johnston) that may address this concern. There are 3 possible causes from a body mount at...
Should I change my rotors?
Without seeing the vehicle, it would be hard to say if it would be safe. However, if the rotors are still of a usable thickness, it is possible to do what is referred to as a "pad slap", which means...
Water hose leaking at firewall of 2012 ford focus
Typically, those are molded 5/8 inch ID rubber coolant hoses that are retained by either spring steel clamps or adjustable stainless steel worm drive clamps. Once you remove the hose, even to inspect it, it will not seal well when...
Car wont turn over. New battery and ignition coils.
Be sure the battery is actually fully charged (even a new battery can be discharged). If the starter motor is not even cranking the engine, among the first possibilities is a weak battery, excessive voltage drop in the starter circuit...
Hey I wash wondering if I can put a twin turbo in my chevy cruze LT 1.4turbo
Hi Miguel. I've always believed that anything is possible with fabrication. However, fitting a dual-turbo charged system on your OEM engine would require a tremendous amount of upgrades, ranging from intake changes, exhaust, as well as internal combustion changes like...
Browse other content
Cities
Estimates
Maintenance
My car doesn't shift to drive mode only Return Mechanic's Assistant: How old is the [transmission](/topics-transmission-ford/)? Have you noticed any leaking? 2001 ford F150 Mechanic's Assistant: Are you fixing you...
My car doesn't shift to drive mode only Return Mechanic's Assistant: How old is the [transmission](/topics-transmission-ford/)? Have you noticed any leaking? 2001 ford F150 Mechanic's Assistant: Are you fixing your F150 yourself? What have you tried so far? My brother Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? That's all I want to know