Q: Engine will not build heat. New therm water pump clutch fan no difference

asked by on

Engine will not build heat temp gauge will only go to the beginning of the white line just above cold and heat Is very minimal put New thermostat water pump clutch fan nothing made a difference

My car has 150000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine will not build heat. New therm water pump clutch fan no difference

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Blower motor not blowing air

Hello, thank you for writing in. You have to replace the resistor because it was likely the cause of the melting wire. You have to replace that wire as well. Often replacement wires are not the same color. As long...

Q: Runs for a little bit and dies

In order to isolate the problem you should have the fuel pressure monitored with a pressure gauge hooked up to the fuel rail. As the engine is running monitor fuel pressure when it stalls out to see if pressure drops...

Q: How does the Roll Stability Control™ system work?

Your vehicle offers several different control systems to make driving safer in a very wide range of conditions. One of those is the Roll Stability Control™ (RSC) system. RSC is designed to help enhance stability, which is necessary because of...

Related articles

How Long Does a Heater Control Valve Last?
Keeping the right amount of coolant in a car is essential in keeping the engine at the right temperature. Failing to have the right amount of coolant or even bad elements...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.