Q: Engine overheats with new radiator, new thermostat and fan relay

asked by on

Even after replacing the radiator, thermostats, and fan relay the engine overheats after a few highway miles. Coolant is full. Upper radiator hose will be hot while the lower seems to be cool. Coolant doesn't appear to be leaking from anywhere. Oil is changed regularly.

My car has 140000 miles.
My car has an automatic transmission.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine overheats with new radiator, new thermostat and fan relay

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Heat is not blowing out of the vents, even when on high.

The lack of heat being generated by your system may indicate a clogged heater core. The [heater core]((https://www.yourmechanic.com/services/heater-is-not-working-inspection) is a small radiator like unit that circulates the hot coolant from the engine through the heater core which then uses this...

Q: I have a new thermostat, how much should it cost to change it out?

Billing question sent to CS for the cost to replace the thermostat on a 2010 Jeep Liberty V6- 3.7L.

Q: Q: Blown head gasket

Without seeing the vehicle it would be hard to know if it is worth the repairs. I would recommend having a complete vehicle inspection to see if the vehicle only needs a head gasket and does not have more major...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.