Q: Engine making humming and bumping noise.

asked by on

Hello, depending on where the damage is on the car you may have broken or bent something on the outside of the motor. I would say the most common problems would be from a fan that is damaged or a pulley that the serpentine rides on. I would have a qualified technician, such as one from Your Mechanic, determine where the noise is coming from.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Engine making humming and bumping noise.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Unplugged output shaft speed sensor to look at possible shotty wiring, plugged it back in, and car shifts worse than before

When you disconnected and reinstalled sensor connector you may have lost most if not all of the connection and may need to remove and clean out connections and new sensor pins with an electronics cleaner and apply a small amount...

Q: Engine noise at 3500 RPM

Generally, they are just worn-out fan belts. You might just look at them, or if they are 4-5 years old, have them all changed. They are rubber and only last so long. They stretch, they wear internally, and if they...

Q: My car turns over but won't start, no power to the fuel pump or fuel injectors

It sounds like you may not have any power going to the fuel pump relay. The relay wires should have ground on two wires, power on one wire and switched power on another wire. To activate the fuel pump your...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0240 OBD-II Trouble Code: Turbocharger Boost Sensor B Circuit Range/Performance
P0240 code definition Turbocharger Boost Sensor B Circuit Range/Performance What the P0240 code means P0240 is an OBD-II generic code triggered when the Engine Control Module (ECM) detects the intake boost...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...