Trying to change a drag link assembly on my van. bought a...
Responses
AhmedT111
264 days ago
Hi, sometimes the rust will get it stuck. can you hit it with a crowbar or something , just lightly hit it it.
AhmedT111
264 days ago
Let me know if it works for you.
AhmedT111
264 days ago
Hi and welcome to JustAnswer! You can ask unlimited questions to any of the 12,000 Experts! From doctors, lawyers, tech support, contractors, tutors, auto and boat mechanics, appliance technicians, veterinarians, accountants, appraisers, psychologists, engineers, heavy machinery masters, dream interpreters, and more, we've got you covered, 24/7.
My name is \*\*\*\*\* \*\*\*\*\* I will be able to assist you. I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out.
Thank you for taking the time to let us help you out with this problem and hopefully we can sort it out quickly.
Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to help solve your specific problem.
Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
Use a hammer to hit the bar that the link goes through. Hit it directly where the joint goes through the bar. This will shock the link loose and allow it to come out.
My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. If I’m not online at the time, I will respond ASAP when I get back.
Still not sure what you need?
Have a certified mobile mechanic diagnose what's wrong with your car, at your home or office.
Top Questions
Trending Topics
What others are asking
Car does not go into gear.
Most of the time when this issue occurs it is due to the shift interlock solenoid going bad. Systems that use this part usually have a manual override button near the shifter in order to manually shift into a gear....
How do I replace a remote keyless entry (RKE) transmitter?
If you want a new remote keyless entry (RKE) transmitter, you will need to purchase one at a dealership. If the new RKE transmitter is replacing a lost transmitter, the entire RKE system will need to be reprogrammed for all...
Just changed timing belt, starts wont stay on in idle, give it gas and it shuts off, HELP PLEASE..!!
When you damaged the belt and turned on the motor you most likely bent the valves. This is an interference motor, meaning that the pistons and the valves can occupy the same space, just not at the same time. If...
stuck in first gear
For this issue I would first recommend having your transmission inspected by a certified professional. There are a number of things including faulty shift solenoids (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-shift-interlock-solenoid), low fluid level, or catastrophic damage that could be causing your transmission to have...
White smoke billows out of exhaust pipe
Hey there. White exhaust smoke is generally indicative of a blown head gasket or other conditions where water or water vapor is getting into the engine. Higher mileage vehicles are especially prone to this potential problem. Have a professional mechanic,...
Headlights, power locks, and speedometer not working
Hey there. The fact that the ABS and 4WD service lights came on means there is a fault code stored that may shed some light on those problems. Commonly when the ABS and 4WD lights come on together, the problem...
Anti thrift lock on and want let car start
The Ford anti theft system requires a properly coded key for start and run this vehicle. If you have additional key then try to see if it works. If it does not then you will need to have a dealer...
Wheel lug nut broke off while servicing. The screw which it's locked on too broke off. What whould I do?
You are probably referring to the stud that is pressed into the wheel hub. If there is adequate space behind the hub the broken stud can be pressed out and and a new stud pressed into place. However, if there...
Was driving my h2 at 48 miles per hour when the gear got knocked into reverse by accident and now my H2 will not go in reverse
Hi there. Thanks for contacting us today. If you shifted into reverse while the vehicle was in forwarding motion, it's likely that shift linkage or the reverse gear itself has been damaged. Honestly, without completing an inspection (https://www.yourmechanic.com/services/car-is-hard-to-shift-inspection), it's hard...
Browse other content
Estimates
Maintenance
Services
Trying to change a drag link assembly on my van. bought a new one and thought it would be easy to take the old one off. Not..... got the nuts off and the bar will not come out. Is there a trick to this? Mechanic's Assistant:</...
Trying to change a drag link assembly on my van. bought a new one and thought it would be easy to take the old one off. Not..... got the nuts off and the bar will not come out. Is there a trick to this? Mechanic's Assistant: What is the make/model/year of your car? Dodge van 2500 2001 Mechanic's Assistant: Are you fixing your Van 2500 yourself? What have you tried so far? Yes. took the nuts off of the old drag link and it will not come out. Mechanic's Assistant: Anything else you want the Mechanic to know before I connect you? That's it