Skip the auto shop - Our mechanics make house calls

Q: How do I replace a remote keyless entry (RKE) transmitter?

asked by on

How do I replace a remote keyless entry (RKE) transmitter?

If you want a new remote keyless entry (RKE) transmitter, you will need to purchase one at a dealership. If the new RKE transmitter is replacing a lost transmitter, the entire RKE system will need to be reprogrammed for all of the transmitters.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I program and reset Remote Start?

Remote start is a helpful feature. Remote Start allows you to start your vehicle before you get into it and keeps it running for a certain amount of time. This is particularly helping in hot or cold weather conditions because...

Q: changing a reverse light bulb it the trunk lid of a 2003 impala ?

To change the lights, you'll have to remove the 8 or 10 wing nuts on the inside of the trunk lid holding in the rear light cover on. Remove the cover and the light bulbs are exposed so you can...

Q: Jerking of the steering wheel that occasionally becomes locked

GM has a TSB out for this issue. Basically what the bulletin says is that, due to increased friction in the steering gear, there can be a locked up or notchy feel that can be experienced when the steering wheel...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.