Hi I just a put a new throttle body in on my 2010 Dodge C...


Hi I just a put a new throttle body in on my 2010 Dodge Charger but the lightning bolt still appears what do I need to do Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding y...

Hi I just a put a new throttle body in on my 2010 Dodge Charger but the lightning bolt still appears what do I need to do Mechanic's Assistant: Okay, I'll connect you to the Mechanic to go over that information regarding your Dodge Charger. Before I do, is there anything else you want him to know? Yes what is the easy way to do a relearn

Automotive Expert
Hello and welcome to Just Answer. I'm Paul, And happy to help you with your question today. unfortunately a factory scan tool is required to perform the throttle body relearn. See details below. [https://peapull.com/o/1610475971.pdf](https://peapull.com/o/1610475971.pdf) its the same for all engine sizes. a relearn would run around $100 at shop and requires a factory compatible scan tool If you need more help just reply, and let me know. Thank you, Paul

What others are asking

How do you remove the head restraints?
While you should never drive or ride without head restraints, there may be times that you need to remove them. For instance, if you’re lowering the second row seats, you’ll need to remove the two outside head restraints (the center...
Replace timing belt.
Camshaft and Crankshaft position sensors are somewhat common failures seen in the Hyundai Santa Fe, mainly due to the temperature abuse they both receive inside of the engine. From extreme hot when the engine runs, to very cool ambient temperature...
How do I flash the high beams?
You can quickly flash the high beam headlights to get the attention of another driver or a pedestrian. To do so, pull the turn signal lever (which protrudes from the left side of the steering column) towards you, and immediately...
Loud noise when car starts
Unfortunately, the information you provided about your Dodge Durango is very limited, and I will be unable to make a proper diagnosis at this time. I would recommend enlisting the assistance of a certified mechanic and including as much information...
My truck keep stalling when stopped randomly, its not all the time. Service engine like has just Came on
There are so many possible causes of random stalling, it's hard to say what exactly the problem could be. Having the Check Engine Light scanned (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) would be a good first step though. This will provide the technician with information...
Isn't the timing belt suppose to be changed at 90,000?
I would definitely recommend changing the timing belt (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-timing-belt) at the 90,000 mile recommended interval. As you may know, the timing belt keeps your engine's critical components in sync. Fortunately, this model does NOT have what is called an "interference"...
P0014 code. The engine run erratic and have a hard starting problem..when i took it to mechanic he said to get a part reqired for
The camshaft position sensor is a magnetic sensor that monitors camshaft speed to regulate ignition timing and fuel injection timing. It gathers and sends information about the car’s camshaft speed to the car’s electronic control module. This information is used...
My car runs hot immediately after starting, I just noticed it yesterday.
A small coolant leak will in time become a bigger issue. It is not good for the engine to be overheated (https://www.yourmechanic.com/services/car-is-overheating-inspection) because it can damage the engine internally. Water is okay to use for a temporary fix. Any condition...
What name brand oil filter do you use?
We use only high quality oil filters and oil for the changes for you. Depending on what is available in your area and the application.