Q: Q: How do I flash the high beams?

asked by on

How do I flash the high beams?

You can quickly flash the high beam headlights to get the attention of another driver or a pedestrian. To do so, pull the turn signal lever (which protrudes from the left side of the steering column) towards you, and immediately release. This will work even when the headlights are turned off.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Q: How do I flash the high beams?

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Q: How do I turn on the headlights?

The headlights are controlled with the Headlamp Control knob. To turn on the headlights, rotate the knob to the headlight position.

Q: Q: Headlights not working.

Hello, the first thing to check would be the fuse(s) for the headlamps. If the fuses are good, if it's just the low beam and the hi beams that work ok, I would suspect the multifunction switch. The multifunction switch...

Q: How do I use the Bluetooth HandsFreeLink®?

Some 2012 Accords came equipped with the Bluetooth HandsFreeLink® (HFL) system. If your car has this onboard, it can be used to allow hands free communication through your smartphone and the car’s audio system. You’ll see the buttons on the...

Related articles

What Causes Hoses to Leak?
While the largest part of your engine is mechanical, hydraulics plays a significant role. You’ll find fluids at work in a number of different areas. Your car's fluids include: Engine oil Transmission...
How to Avoid Back Pain in a Car
If you have back problems, sitting in a car for an extended period of time can be excruciating. Even without back problems, you could experience discomfort and soreness from...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.