Skip the auto shop - Our mechanics make house calls

Q: Dashboard lights out.

asked by on

The lights in the dashboard are not lighting up.

Hello, The backlighting of the gages failing is a known concern. The repair is to replace the cluster with an updated unit per TSB 07-08-49-029A. Being that the instrument cluster is a coded part you should visit a dealer to have the repair performed.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Ask a Mechanic
(100% Free)

Have a car question? Get free advice from our top-rated mechanics.

Ask A Mechanic
Over 10,000 questions answered!

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: How do I read the speedometer?

The speedometer is placed on the right side of the instrument cluster, and tells you how fast you are driving at any given time. The speedometer has two semicircles, each with a set of numbers. The smaller, inside semicircle tells...

Q: Headlights and dashboard lights flash off/on when switch control is switched to lights on

You may need to have the lighting control module reprogrammed to fix the problem with the auto lights. There are technical bulletins to reprogram the module. You will most likely need to have the dealer do this.

Q: What is the name of the hose that is on the top of the fuel filter that it's connected to?

The inline fuel filter has 3 lines all combined in the area. The supply hose is connected to the fuel filter. The return hose is connected to the top of the fuel tank. The vapor return hose is connected to...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.