Skip the auto shop - Our mechanics make house calls

Q: Car wobbles in the rear.

asked by on

I have a wobble in the rear. I already put new tires on and had the rims balanced. I'm thinking that I could have a bad or bent rim.

You could have a bent rim or a bent hub. I would have the rim and hub checked to see which one is bent. I would recommend having a mechanic, like the certified ones at YourMechanic, come and check it out for you to see what is causing the problem.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Car stalling at average speeds, no engine codes

A faulty air mass meter could cause drivability issues and not throw a code right away. The air mass meter is one of the sensors that help sets base injection timing. If the sensor is reading correctly but is within...

Q: How to change sparkplugs? 1997 Cadillac Eldorado

Hi there - your first move would be to carefully sketch or cellphone camera record each coil position, then removed the coil packs. Using a spray tube, hose down the spark plugs with rust penetrant (WD-40, PB Blaster or similar),...

Q: Power antenna not working

The problem is most likely the motor for the power antenna. Motors wear out over time (28 years) and will eventually stop working. I would first check the fuse to see if it is blown, if so the antenna motor...

Related articles

What are the Car Pool Rules in Hawaii?
Hawaii is widely regarded as a land of vacation and relaxation, and as such, its scenic roads and routes are far better known than the state’s freeways. But, as with all...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.