Q: Car radio stopped working

asked by on

The radio in my car stopped working. I had the fuse checked and everything seems to be okay.

Hello. Most likely your radio has an internal problem that can only be fixed by replacing the radio entirely. There could be a problem with the wiring going to your radio, but this is rare and would probably cause the fuse to blow out. This is why in most cases, the whole radio needs to be replaced. Have a certified technician take a look at your radio and assist you with this.

Was this answer helpful?

Need advice from certified mechanic? Get help now!

Over 1,000 mechanics are ready to answer your question.
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Car radio stopped working

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Is it possible to replace the standard Dimension Stereo in a Non Nav Limited with the Navigation system?

Your best bet is to check a website like Crutchfield.com. They have the best information on what systems will fit your car. Attempting to fit an OE Hyundai navigation/radio unit will probably cost a lot more than you think. Also,...

Q: Car runs rough sometime an engine diagnosis says I have a misfire in three of my six cylinders sometimes car runs smooth other tim

Hello, thank you for writing in. When it comes to a misfire on several cylinders, the vehicle is likely struggling with compression. If the issue was fuel or spark related, the engine would have a misfire code on all cylinders....

Q: AC fuse keeps blowing

I would try and disconnect the A/C compressor to see if the fuse still blows. The compressor is the only thing that gets energized in all settings except economy. If this works and the fuse does not blow, then the...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
P0052 OBD-II Trouble Code: HO2S Heater Control Circuit High (Bank 2 Sensor 1)
P0052 code definition HO2S Heater Control Circuit High (Bank 2 Sensor 1) What the...
P2428 OBD-II Trouble Code: Exhaust Gas Temperature Too High Bank 1
P2428 code definition A P2428 trouble code signifies that the PCM has detected a problem in the exhaust gas temperature sensor circuit in bank 1, which subsequently contains the number one...