Q: Dodge Challenger bolt pattern.

asked by on

What is the bolt pattern range for a dodge challenger

Hello. The stock bolt pattern for the Dodge Challenger is 5 x 115mm, 5 lug wheel with a medium offset. Using wheels with any other bolt pattern or too high or low of offset may result in improper fitment or vibrational issues.

Was this answer helpful?
The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details
  1. Home
  2. Questions
  3. Dodge Challenger bolt pattern.

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

Get a quote

What others are asking

Q: Is my rack opinion damaged?

The rack and pinion gear set does two things: It converts the rotational motion of the steering wheel into the linear motion needed to turn the wheels. It also provides a gear reduction, making it easier to turn the wheels...

Q: My engine turns off when stopped - 2007 Dodge Nitro

Hello. This behavior could be caused by a dirty or faulty idle air control valve, a dirty throttle body, an air leak in the intake, or a clogged fuel injector problem. I would recommend having a certified technician, such as...

Q: Code P0128 - running too cold

Hello. This code is indicating that your car’s thermostat is not working properly. Your thermostat needs to be replaced and engine lights needs to be reset. Your car will also need to be test driven. Spark plugs are also recommended...

Related articles

How Long Does a Distributor O Ring Last?
The distributor is part of the ignition system in your vehicle and its purpose is to route high voltage from the ignition coil to the spark plug. The spark plug then...
Rules of the Road For Iowa Drivers
Driving on the roads requires knowledge of the rules, many of which are based on common sense and courtesy. However, even though you know the rules in...
P2103 OBD-II Trouble Code: Throttle Actuator Control Motor Circuit High
P2103 means there is a fault with the throttle actuator control motor circuit, likely due to a defective electrical component or part.