Q: Arrive advanced track, car jerked and slowed at highway speed

The Keyless Entry Keypad gives you access to unlocking your truck without using your keys. It also lets you lock the doors. To lock and unlock the doors using Keyless Entry. Enter the factory code or your personal code. Press...

Get in touch with a good mechanic and get the tires checked. The balance on the tires is checked first. Bad balance would often do that. If you don't see anything loose when you jack it up, pull the tires...

You may have a leak you have not seen if you had to add coolant. You should also not have to turn on the heater to full blast to cool the engine. This tells me you either have a cooling...

Hi, thanks for writing in. I'd be happy to help. Once the check engine light is on, the computer memory will need to be cleared. This has to be done with a computer scanner hooked to the OBD-II connector. If...

This may possibly be a faulty fuel tank sending unit (https://www.yourmechanic.com/parts/fuel-level-sending-unit). This is a float type designed sending unit that sits inside your fuel tank that monitors the fuel level inside the tank. When this is faulty or failing it...

Hey there. It sounds like the hub may not have been pressed all the way into the bearing on installation. It's an easy mistake to make. Pressing in the hub takes a tremendous amount of force so it's sometimes hard...

Hi - having changed the brake light switch (most common source of this problem) and confirmed that brake lights are now working (if not, check brake light wiring - switch does more than brake lights), the shift interlock solenoid (https://www.yourmechanic.com/article/symptoms-of-a-bad-or-failing-shift-interlock-solenoid)...

Hi - yes, it should be possible to only remove the serpentine belt idler pulley. After carefully releasing the tensioner, and removing the serpentine belt, there is a plastic cap at the center of the pulley. Pop this cap off,...

Hi there. In most cases, when the engine will idle higher after shifting into neutral or park is an indication of a vacuum leak. It could also be due to a malfunction of the idle control valve, or a malfunction...