Q: How do I lock and unlock the doors using keyless entry?

asked by on December 11, 2015

How do I lock and unlock the doors using keyless entry?

The Keyless Entry Keypad gives you access to unlocking your truck without using your keys. It also lets you lock the doors. To lock and unlock the doors using Keyless Entry.

  1. Enter the factory code or your personal code.

  2. Press the 3-4 button within 5 seconds to unlock all of the doors.

  3. Press the 7-8 and 9-0 button at the same time to lock all of the doors.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

How do I use the power window lock

The power window lock keeps the power windows in your vehicle from working. This can be a key safety feature when children are in the car. To use the power window lock, press the lock button next to the power...

Car smoking and smelling

If the smoke coming from the tailpipe is white and has a sort of sweet smell, it is coolant getting into the exhaust system, due to one of the engine head gaskets being blown, and leaking coolant into one of...

I drove through high water and now my car makes a grinding noise when I start it, drive it or go over any bump in the road.

Hi there. The grinding sound could be coming from multiple sources, ranging from the serpentine belt drive system, to cooling fan motor, wheel bearings or even driveshaft or transaxle. The best way to determine the source of the noise is...

Engine is dying and not getting any gas since new fuel filter

First try and open the gas cap to relieve any vacuum in the fuel system. Make sure you are not out of fuel. Double check the fuel relay is seated properly. If your Check Engine Light is on, then have...

How do you turn on the Auto Headlight function?

If your car is equipped with auto headlights, this is more than a convenience feature. They will automatically turn on and off based on the level of ambient light outside. That ensures better safety at all times while driving (we’ve...

How do I check the tread on the tires?

You can check the amount of tread left on your tires to determine if it needs replaced. Either a triangle symbol or TWI (treadwear indicators) is located on the side of the tire. It is an indicator to tell you...

Hi, I have a problem with the hazard button, it does not turn on at all.

The circuit that that powers the emergency flashers (hazard lights) includes the switch, flasher unit, fuse, wiring, grounds, bulbs, bulb sockets, and sometimes a relay. Before the switch is condemned, the circuit is tested to see if power is even...

My 2002 ford taurus wont go over 30 mph

Hi There, It sounds like your car may have engaged a "safe mode" which is an action the computer or transmission control module will take when something critical has been detected. Your car should have a check engine light on...

Transmission Jerks

Have the drive shaft joints and rear axle pinion bearing checked to see if they have excessive play. Also, check to see if you have any broken motor or transmission mounts. This should help narrow down the problem for you....

Related articles

A Buyer’s Guide to the 2012 Nissan Xterra
The The 2012 Nissan Xterra is designed for those who want a true sport utility that can still handle off-road driving with ease. Built on the same F-Alpha platform seen in the Titan and Frontier trucks, the Xterra also sports...
How to Replace a Door Lock Cylinder
A cylinder lock ensures the proper function of your door locks, which help protect against car theft. Replacing this part takes time and know-how.
2012 Chevrolet Silverado vs. 2012 Dodge Ram: Which One Should I Buy?
When you are looking for a way to get a load of mulch or gravel, or need to haul a large trailer or boat behind your vehicle, chances are you are looking for a truck. Trucks are not meant to...