Q: Acceleration and driving causes grinding sound.

asked by on January 04, 2016

My car makes a loud grinding sound in the rear while accelerating and driving.

Wheel Bearings Replacement $94.60 - $551.42 Get a Quote

Hello, the most common problem for a loud grinding noise is in the wheel bearings. I would have a qualified technician, come and inspect the noise and replace the wheel bearings if needed.

The statements expressed above are only for informational purposes and should be independently verified. Please see our terms of service for more details

Get an instant quote for your car

Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing

What others are asking

Car using a lot more gas

Lack of maintenance may be the cause for the drop in fuel economy. The vehicle does not have variable valve operation, but does have displacement on demand where the engine's computer actually shuts down cylinders to save some fuel. Have...

Several lights quit working

Hello. Thanks for writing in about your 2003 Chevrolet Express 2500. There should be a relay for the turn signals, flasher, and hazard lights. More than likely, this relay is faulty and would need to be replaced. It is also...

Truck won't stay running no check engine codes

You should first identify if the vehicle has California emissions or not. The difference is one will have a mass air sensor in the air cleaner and the other will have a MAP sensor mounted on the a/c evaporator case...

transmission filter needs replaced.

Hi there. The best thing that you could do is remove the filter from the vehicle and take the filter to a local parts store and have them match up the filter with a different filter.

my 1989 corvette anti lock light comes on the car will start then dies

Hi Kristine. Thanks for reaching out to us today. If you're referring to the anti-lock brake light on your Corvette, this typically does not impact the operation of the engine or would cause it to start then shut off. However,...

Car has loss of power when accelerating.

Loss of power on acceleration can be due to plugged fuel injectors, faulty oxygen sensors, fuel pump and/or filter, vacuum leaks including that caused by a faulty EGR system, ignition system malfunctions, bad valve timing if the timing belt or...

Shifting issues during usual acceleration

Hey there, thanks for writing in about your 2009 Mercedes-Benz E550. Be sure to verify that your car is not in "Limp Mode," as this will likely create the same reaction for your car. Mercedes uses this as a safety feature...

Car jerking when accelerating from stop.

The valve covers on these engines are known for leaking oil into the spark plug holes. The seals are part of the valve cover and may need to be replaced. A qualified mechanic, such as one from YourMechanic, can check...

no heat coming out of heater

Hello, thank you for writing in. Check the radiator hoses as well, and make sure both are warm if not hot. If the engine itself is running too cold, by the time the coolant gets to the heater core it...

Related articles

The Best Used Cars to Buy That Can Be Towed Behind an RV
Summer Summer is a great time for a road trip, but often travelers like bringing all the conveniences of home along, in the form of an RV. Then they tow their car behind it – sometimes this practice is called...
A Buyer’s Guide to the 2012 Chevrolet Impala
A A true classic, the 2012 Chevrolet Impala may not have all of the latest high-tech features of other sedans on the market, but it is a tried-and-true model with lots of room, plenty of comfortable features, and a large...
The Best Used Cars to Buy If You Love Camping
Do Do you love camping, getting back to nature and enjoying life in the great outdoors? If you do, then you know that getting there can be half the fun, and it’s even better if you have a great ride....