Q: whining noise
loud whining noise after having my power steering pump and pressure hose replaced, noise was absent before the pump broke down. took the truck back to the shop for 3 times they cant fixed the noise
The statements expressed above are only for informational purposes and should be independently verified. Please see our
terms of service
for more details
Get an instant quote for your car
Our certified mechanics come to you ・Backed by 12-month, 12,000-mile guarantee・Fair and transparent pricing
What others are asking
Oil leak and hissing noise
You will need to check out all of the plastic oil feed lines on the center area of the motor to see if one is broke. This will pump out the oil. Make sure not to let the oil get...
Steering wheel gets stuck left, grinding noise - 2004 Dodge Ram 2500
Hello. It sounds like the steering gear box and/or the power steering pump is going bad. The steering gear box is what is allowing the wheels to turn left and right when using the steering wheel. There are gears and...
Violent shaking when hitting bumps at high speeds
Hi and thanks for contacting YourMechanic. The cause for the bouncing around the road is a loose suspension, loose steering, or failed shock. Check all of the suspension control arms and check the sway bars front and rear. Check the...
I have no idea what's wrong with my car
Hi there. From the description you have provided, there are many possibilities for your vehicle's drivability problems. It could be a fuel delivery problem, such as a faulty fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement) not having the correct fuel pressure or no rest...
Turn key won't start. When I keep turning the key it will start. Had the starter checked and it was good.
Hi there. It is possible, the ignition switch is at fault (https://www.yourmechanic.com/services/electrical-components-are-not-working-inspection) for the no crank situation. It could also be the result of, a faulty clutch inhibitor switch (https://www.yourmechanic.com/services/clutch-switch-replacement) manual transmission, a faulty neutral safety switch (https://www.yourmechanic.com/services/neutral-safety-switch-replacement) automatic transmission,...
Will my car turn on normally again once I fix the crankshaft position sensor?
A faulty crankshaft position sensor (https://www.yourmechanic.com/services/crankshaft-position-sensor-replacement) could cause hard starting but to determine if the sensor itself is faulty it has to actually be tested. Often, there will be a Diagnostic Trouble Code (DTC), that is generated by the car's...
My 2001 Camry stalls in reverse.
Hi there. Check the conditions of when the engine is stalling out. Push the vehicle into a spot where you can start the engine and put the transmission in drive. Then see if the vehicle drives around. If the vehicle...
Parasitic drain 2005 tahoe on ignition a fuse
Hello, thank you for writing in. Great job on the electrical testing thus far! A wiring diagram for the vehicle will work wonders for you if you can obtain one. If you are referring to the ignition switch fuse, then...
Squeaking from the front driver side
What you are describing sounds like a bad or worn out ball joint. A ball joint is designed to pivot through multiple planes. Of course, because the ball joint constantly pivots at different angles, it tends to wear out more...
Related articles
How to Unfreeze Door Locks
Frozen door locks are a pain when you need to hit the road. Don't use hot water to fix frozen door locks. A hair dryer or de-icer is a better fix
How to Buy a Good Quality Heat Shield
Heat Heat shields are used to keep everything cool and under wraps when you are heating it up on the track or just on the road in a hot part of the country. A heat shield provides necessary protection for...
Symptoms of a Bad or Failing Alternator Belt
A failing alternator belt can cause the Battery Light to turn on, dimming or flickering lights in the car, and engine stalls.
Browse other content
Estimates
Maintenance
Cities